Connect the power supply to the switch.

Connect a console cable to the serial port (10101) on the back of the server.[1-4, 2-3, 5-5, 7-8, 9-9]-curently connected, but see in actual console cable is in the car. minicom isn't working.

«needs to go onto the server install page.» apt-get install microcom to the server

«server page» conig microcom. -microcom -s [opens microcom config menu] -baud = 9600 -Parity = None -

Once Microcom is configured and running. Once you have an assembled cable which will mimic a RS-232 9pin straight thru cable for communication. Finally, once you have an online message on the screen from minicom, use the <ctrl>+Y key combination to access the switch configuration menu.

Baystack 450 Manual from retrevo.com