Lab46 Wiki

User Tools

Site Tools

You are here: start » user » bewanyk » portfolio » autodraw
user:bewanyk:portfolio:autodraw

Table of Contents

Auto Draw with XPaint!

Requirements

Begin with a PC or terminal with a unix/linux operating system, xpaint, xwit, and xte packets installed.

Open a terminal session and begin by reading and experimenting with xte and xwit commands. Once you are familliar with some of the possibilities provided by xte and xwit open a terminal window and begin editing a file for construction of your auto draw project.

Beginning

Use the xwit commands to move the mouse and issue mouse click commands.

Begin with mouse movement using xwit. The location of the mouse destination is read from a 0, 0 origin located at the top left corner of the screen. to move the mouse pointer to that 0, 0 point use the command: 

:~$xwit -warp 0 0 -root

Performing mouse clicks is easily accomplished using xte commands. The mouse buttons are numbered starting with one on the left, two for the middle button, and three as a right click. Therefore to issue a mouseclick you would use the command: 

:~$xte 'mouseclick 1'

To click and hold, as if for a click and drag function use the mousedown # command to press the button and teh mouseup # command to release it. 

:~$xte 'mousedown 1'
:~$xte 'mousemove 100 100'
:~$xte 'mouseup 1'

Using and investigation and the man pages fro xwit and xte eventually you can develop a script to move the mouse around the screen and perform actions without touching the computer itself. 

#!/bin/bash
echo "Move mouse pointer to top left corner (0,0)..."
xwit -warp 0 0 -root
echo -n "Pause 5 seconds."
xte 'sleep 5'
echo "Move mouse pointer to bottom right corner (1280,1024)..."
xwit -warp 1280 1024 -root
echo "pause 3 seconds..."
xte 'sleep 3'
echo "Move mouse pointer to middle of screen (640, 512)..."
xwit -warp 640 512 -root
xte 'mousemove 320 768'
echo "open a lab46 window."
xte 'mouseclick 3'
xte 'key Down'
xte 'key Return'

Progression

Once you have experience to this point, now you can use wininfo to make the script more dynamic.

The wininfo command will display information on the display you're using. By examining the output from this command you can then use grep and sed commands to extract only the size of the display in use. 

xTot=`xwininfo -root|grep Width|sed 's/^.*: //'`
yTot=`xwininfo -root|grep Height|sed 's/^.*: //'`

These derived numbers can then be utilized with the xwit -resize option to gage the size of windows on the display. Making any scripts you produce using them more dynamic and impressive.

Using these commands and normal commmand execution you can soon begin to draw things in X-Paint. use xwit -warp commands to find buttons on the canvas and pallet for xpaint. Set variables to send you directly to those locations, and eventually your script will evolve into something like this…

There can be squares inside squares with a script like this: 

#!/bin/bash
winID=""
let lat=hei=0
xwit -warp 0 0 -root
tot=`xwit -all -print|grep Untitled|wc -l`
if [ tot > 0 ]; then
count=1
for ((count; count <= tot; count++)); do
winID=`xwit -all -print|grep 'Untitled'|head -1|sed 's/:.*$//'`
if [ -z $winID ]; then
echo -n
else
xwit -id $winID -name Rnd$count
winID=""
fi
done
fi
xTot=`xwininfo -root|grep Width|sed 's/^.*: //'`
yTot=`xwininfo -root|grep Height|sed 's/^.*: //'`
#echo $xTot
#echo $yTot
xpaint -nowarn &
xte 'sleep 5'
palt=`xwit -all -print|grep XPaint|sed 's/:.*$//'`
xwit -id $palt -move 0 0
let latP=`xwit -id $palt -print|sed 's/^.*w=//'|sed 's/ h=.*$//'`
let canX=$xTot-$latP
let canY=$yTot
menuP="xwit -warp 18 36 -root"
menuDwnP="xwit -rwarp 0 20 -root"
OrigP="xwit -warp 25 76 -root"
btnDwnP="xwit -rwarp 0 40 -root"
btnUpP="xwit -rwarp 0 -40 -root"
btnRtP="xwit -rwarp 40 0 -root"
btnLtP="xwit -rwarp -40 0 -root"
$menuP
xte 'mouseclick 1'
$menuDwnP
$menuDwnP
xte 'mouseclick 1'
xte 'sleep 2'
xte 'key BackSpace'
xte 'key BackSpace'
xte 'key BackSpace'
xte "str $canX"
xte 'key Tab'
xte 'key BackSpace'
xte 'key BackSpace'
xte 'key BackSpace'
xte "str $canY"
xte 'sleep 3'
xte 'key Return'
xte 'key Return'
xte 'sleep 3'
canID=`xwit -all -print|grep 'Untitled'|sed 's/:.*$//'`
#echo $canID
if [ -z $canID ]; then
echo -n
else
xwit -id $canID -name Pic
fi
let latC=`xwit -id $canID -print|sed 's/^.*w=//'|sed 's/ h=.*$//'`
let heiC=`xwit -id $canID -print|sed 's/^.*h=//'|sed 's/ d=.*$//'`
xwit -id $canID -move $latP 0
editB="xwit -warp 175 36 -root"
origN="xwit -warp $(($latP+8)) $(($heiC+13)) -root"
$OrigP
$btnDwnP
$btnDwnP
$btnDwnP
$btnDwnP
$btnRtP
xte 'mouseclick 1'
$origN
xwit -rwarp 200 -200 -root
xte 'mousedown 1'
xte 'sleep 1'
xte 'mousermove 200 -200'
xte 'sleep 1'
xte 'mouseup 1'
xte 'sleep 1'
xwit -warp 265 56 -root
xte 'mouseclick 1'
xte 'sleep 1'
$origN
xwit -rwarp 250 -250 -root
xte 'mousedown 1'
xte 'mousermove 100 -100'
xte 'mouseup 1'
xte 'sleep 1'
echo "Dun."

Eventually with work it will progress till you can create multiple constructions. Squares, Circles, Fill actions and more! 

#!/bin/bash
winID=""
let lat=hei=0
xwit -warp 0 0 -root
tot=`xwit -all -print|grep Untitled|wc -l`
if [ tot > 0 ]; then
count=1
for ((count; count <= tot; count++)); do
winID=`xwit -all -print|grep 'Untitled'|head -1|sed 's/:.*$//'`
if [ -z $winID ]; then
echo -n
else
xwit -id $winID -name Rnd$count
winID=""
fi
done
fi
xTot=`xwininfo -root|grep Width|sed 's/^.*: //'`
yTot=`xwininfo -root|grep Height|sed 's/^.*: //'`
#echo $xTot
#echo $yTot
xpaint -nowarn &
xte 'sleep 5'
palt=`xwit -all -print|grep XPaint|sed 's/:.*$//'`
xwit -id $palt -move 0 0
let latP=`xwit -id $palt -print|sed 's/^.*w=//'|sed 's/ h=.*$//'`
let canX=$xTot-$latP
let canY=$yTot
menuP="xwit -warp 18 36 -root"
menuDwn="xwit -rwarp 0 20 -root"
origP="xwit -warp 25 76 -root"
btnDwnP="xwit -rwarp 0 38 -root"
btnUpP="xwit -rwarp 0 -38 -root"
btnRtP="xwit -rwarp 38 0 -root"
btnLtP="xwit -rwarp -38 0 -root"
$menuP
xte 'mouseclick 1'
$menuDwn
$menuDwn
xte 'mouseclick 1'
xte 'sleep 2'
xte 'key BackSpace'
xte 'key BackSpace'
xte 'key BackSpace'
xte "str $canX"
xte 'key Tab'
xte 'key BackSpace'
xte 'key BackSpace'
xte 'key BackSpace'
xte "str $canY"
xte 'sleep 3'
xte 'key Return'
xte 'key Return'
xte 'sleep 3'
canID=`xwit -all -print|grep 'Untitled'|sed 's/:.*$//'`
#echo $canID
if [ -z $canID ]; then
echo -n
else
xwit -id $canID -name Pic
fi
let latC=`xwit -id $canID -print|sed 's/^.*w=//'|sed 's/ h=.*$//'`
let heiC=`xwit -id $canID -print|sed 's/^.*h=//'|sed 's/ d=.*$//'`
xwit -id $canID -move $latP 0
editB="xwit -warp 175 36 -root"
origN="xwit -warp $(($latP+8)) $(($heiC+13)) -root"
#get filled square
$origP
$btnDwnP
$btnDwnP
$btnDwnP
$btnDwnP
$btnRtP
xte 'mouseclick 1'
$origN
xwit -rwarp 200 -200 -root
xte 'mousedown 1'
xte 'sleep 1'
xte 'mousermove 200 -200'
xte 'sleep 1'
xte 'mouseup 1'
xte 'sleep 1'
xwit -warp 265 56 -root
xte 'mouseclick 1'
xte 'sleep 1'
$origN
xwit -rwarp 250 -250 -root
xte 'mousedown 1'
xte 'mousermove 100 -100'
xte 'mouseup 1'
xte 'mousermove 100 -100'
xte 'mouseup 1'
xte 'sleep 20'
#clear canvas
$editB
xte 'mouseclick 1'
for ((count=0; count<11; count++)); do
$menuDwn
done
xte 'mouseclick 1'
xte 'sleep 1'
let xCntr=$xTot/2
let yCntr=$yTot/2
xwit -warp 232 60 -root
xte 'mouseclick 1'
xte 'sleep 1'
#get empty circle
$origP
xte 'sleep 1'
$btnDwnP
$btnDwnP
$btnDwnP
$btnDwnP
$btnDwnP
xte 'sleep 1'
xte 'mouseclick 1'
xte 'sleep 1'
xwit -warp $(($xCntr-250)) $(($yCntr+250)) -root
xte 'mousedown 1'
xte 'mousermove 500 -500'
xte 'mouseup 1'
xte 'sleep 1'
$origP
for ((count=0; count<9; count++)); do
$btnDwnP
done
xte 'mouseclick 1'
xte 'sleep 1'
#set green
xwit -warp 352 58 -root
xte 'mouseclick 1'
xwit -warp $xCntr $yCntr -root
xte 'mouseclick 1'

The final Step

With work and experimentation, eventually you can utilize the -rwarp option in xwit and the mousermove in xte to do relative moves. finally you can produce scenes and pictures based on geometric extrapolation. The scripts will get a bit long, but the results can be impressive. 

#!/bin/bash
winID=""
let lat=hei=0
xwit -warp 0 0 -root
tot=`xwit -all -print|grep Untitled|wc -l`
if [ $tot > 0 ]; then
count=1
for ((count; count <= tot; count++)); do
winID=`xwit -all -print|grep 'Untitled'|head -1|sed 's/:.*$//'`
if [ -z $winID ]; then
echo -n
else
xwit -id $winID -name Rnd$count
winID=""
fi
done
fi
xTot=`xwininfo -root|grep Width|sed 's/^.*: //'`
yTot=`xwininfo -root|grep Height|sed 's/^.*: //'`
let xCntr=$xTot/2
let yCntr=$yTot/2
xpaint -nowarn &
xte 'sleep 7'
menuP="xwit -warp 18 36 -root"
menuDwn="xwit -rwarp 0 20 -root"
origP="xwit -warp 25 76 -root"
btnDwnP="xwit -rwarp 0 37 -root"
btnUpP="xwit -rwarp 0 -37 -root"
btnRtP="xwit -rwarp 38 0 -root"
btnLtP="xwit -rwarp -38 0 -root"
palt=`xwit -print -all|grep XPaint|sed 's/:.*$//'`
xwit -id $palt -move 0 0
let latP=`xwit -print -id $palt|sed 's/^.*w=//'|sed 's/ h=.*$//'`
let canX=$xTot-$latP
let canY=$yTot
#open canvas to screen - pallette.
$menuP
xte 'mouseclick 1'
$menuDwn
$menuDwn
xte 'mouseclick 1'
xte 'sleep 3'
xte 'key BackSpace'
xte 'key BackSpace'
xte 'key BackSpace'
xte "str $canX"
xte 'key Tab'
xte 'key BackSpace'
xte 'key BackSpace'
xte 'key BackSpace'
xte "str $canY"
xte 'sleep 3'
xte 'key Return'
xte 'key Return'
xte 'sleep 3'
canID=`xwit -all -print|grep 'Untitled'|sed 's/:.*$//'`
if [ -z $canID ]; then
echo -n
else
xwit -id $canID -name Scene
fi
let latC=`xwit -print -id $canID|sed 's/^.*w=//'|sed 's/ h=.*$//'`
let heiC=`xwit -print -id $canID|sed 's/^.*h=//'|sed 's/ d=.*$//'`
xwit -id $canID -move $(($latP+3)) 0
editB="xwit -warp 178 36 -root"
origN="xwit -warp $(($latP+7)) $(($heiC)) -root"
lineB="xwit -warp 217 36 -root"
red="xwit -warp 271 56 -root"
black="xwit -warp 238 60 -root"
green="xwit -warp 358 58 -root"
blue="xwit -warp 421 60 -root"
ltBlu="xwit -warp 420 69 -root"
yellow="xwit -warp 348 70 -root"
white="xwit -warp 178 70 -root"
orange="xwit -warp 491 70 -root"
grey="xwit -warp 200 60 -root"
line="xwit -warp 217 36 -root"
if [ $canX > $canY ]; then
        let SEG=$canY/30
else let SEG=$canX/40
fi
$black
xte 'mouseclick 1'
$origP
for ((count=0; count < 7; count++)); do
$btnDwnP
done
xte 'mouseclick 1'
$line
xte 'mouseclick 1'
$menuDwn
$menuDwn
$menuDwn
xte 'mouseclick 1'
$black
xte 'mouseclick 1'
$origN
xwit -rwarp 20 -20 -root
xwit -rwarp $(($SEG*9)) 0 -root
#outside frame.
xte 'mouseclick 1'
xte "mousermove $(($SEG*-9)) $(($SEG*-6))"
xte 'mouseclick 1'
xte "mousermove 0 $(($SEG*-12))"
xte 'mouseclick 1'
xte "mousermove $(($SEG*9)) $(($SEG*-3))"
xte 'mouseclick 1'
xte "mousermove $(($SEG*9)) $(($SEG*3))"
xte 'mouseclick 1'
xte "mousermove 0 $(($SEG*12))"
xte 'mouseclick 1'
xte 'mouseclick 2'
$origP
$btnDwnP
$btnDwnP
$btnRtP
xte 'mouseclick 1'
$origN
xwit -rwarp 20 -20 -root
xwit -rwarp $(($SEG*9)) 0 -root
#outer front edge
xte 'mouseclick 1'
xte "mousermove 0 $(($SEG*-12))"
xte 'sleep 2'
xte 'mouseclick 1'
xte 'sleep 2'
xte "mousermove $(($SEG*-9)) $(($SEG*-6))"
xte 'sleep 2'
xte 'mouseclick 1'
xte 'mouseclick 2'
xte "mousermove $(($SEG*18)) 0"
xte 'mouseclick 1'
xte "mousermove $(($SEG*-9)) $(($SEG*6))"
xte 'mouseclick 1'
xte 'mouseclick 2'
#individual cubes.
xte "mousermove $(($SEG*-3)) $(($SEG*10))"
xte 'mouseclick 1'
xte "mousermove 0 $(($SEG*-12))"
xte 'mouseclick 1'
xte "mousermove $(($SEG*9)) $(($SEG*-5))"
xte 'mouseclick 1'
xte 'mouseclick 2'
xte "mousermove $(($SEG*-3)) $(($SEG*-1))"
xte 'mouseclick 1'
xte "mousermove $(($SEG*-9)) $(($SEG*4))"
xte 'mouseclick 1'
xte "mousermove 0 $(($SEG*12))"
xte 'mouseclick 1'
xte 'mouseclick 2'
xte "mousermove $(($SEG*-3)) $(($SEG*-6))"
xte 'mouseclick 1'
xte "mousermove $(($SEG*9)) $(($SEG*6))"
xte 'mouseclick 1'
xte "mousermove $(($SEG*9)) $(($SEG*-6))"
xte 'mouseclick 1'
xte 'mouseclick 2'
xte "mousermove 0 $(($SEG*-4))"
xte 'mouseclick 1'
xte "mousermove $(($SEG*-9)) $(($SEG*6))"
xte 'mouseclick 1'
xte "mousermove $(($SEG*-9)) $(($SEG*-6))"
xte 'mouseclick 1'
xte 'mouseclick 2'
xte "mousermove $(($SEG*3)) $(($SEG*-5))"
xte 'mouseclick 1'
xte "mousermove $(($SEG*9)) $(($SEG*5))"
xte 'mouseclick 1'
xte "mousermove 0 $(($SEG*12))"
xte 'mouseclick 1'
xte 'mouseclick 2'
xte "mousermove $(($SEG*3)) $(($SEG*-2))"
xte 'mouseclick 1'
xte "mousermove 0 $(($SEG*-12))"
xte 'mouseclick 1'
xte "mousermove $(($SEG*-9)) $(($SEG*-4))"
xte 'mouseclick 1'
xte 'mouseclick 2'
#change color to begin fill
$green
xte 'mouseclick 1'
xte 'sleep 3'
#set fill tool.
$origP
for ((count=0; count<9; count++)); do
$btnDwnP
done
xte 'mouseclick 1'
xte 'sleep 3'
#fill blocks.
$origN
xwit -rwarp 20 20 -root
xte "mousermove $(($SEG*1)) $(($SEG*-8))"
xte 'mouseclick 1'
xte "mousermove $(($SEG*6)) 0"
xte 'mouseclick 1'
xte "mousermove $(($SEG*6)) $(($SEG*-1))"
xte 'mouseclick 1'
xte "mousermove $(($SEG*-9)) $(($SEG*-5))"
xte 'mouseclick 1'
xte "mousermove $(($SEG*5)) $(($SEG*-7))"
xte 'mouseclick 1'
xte 'sleep 3'
$red
xte 'mouseclick 1'
xte 'sleep 3'
$origN
xwit -rwarp 20 20 -root
xte "mousermove $(($SEG*4)) $(($SEG*-10))"
xte 'mouseclick 1'
xte "mousermove $(($SEG*6)) $(($SEG*3))"
xte 'mouseclick 1'
xte "mousermove $(($SEG*3)) $(($SEG*2))"
xte 'mouseclick 1'
xte "mousermove $(($SEG*-4)) $(($SEG*-9))"
xte 'mouseclick 1'
xte 'sleep 2'
xte "mousermove $(($SEG*3)) $(($SEG*-6))"
xte 'mouseclick 1'
xte 'sleep 3'
$blue
xte 'mouseclick 1'
xte 'sleep 3'
$origN
xwit -rwarp 20 20 -root
xte "mousermove $(($SEG*3)) $(($SEG*-18))"
xte 'mouseclick 1'
xte "mousermove $(($SEG*9)) $(($SEG*1))"
xte 'mouseclick 1'
xte "mousermove $(($SEG*-5)) $(($SEG*5))"
xte 'mouseclick 1'
xte "mousermove $(($SEG*9)) $(($SEG*4))"
xte 'mouseclick 1'
$yellow
xte 'mouseclick 1'
xte 'sleep 3'
$origN
xwit -rwarp 20 20 -root
xte "mousermove $(($SEG*4)) $(($SEG*-6))"
xte 'mouseclick 1'
xte "mousermove $(($SEG*-3)) $(($SEG*-10))"
xte 'mouseclick 1'
xte "mousermove $(($SEG*8)) $(($SEG*-2))"
xte 'mouseclick 1'
xte "mousermove $(($SEG*7)) $(($SEG*2))"
xte 'mouseclick 1'
$orange
xte 'mouseclick 1'
xte 'sleep 3'
$origN
xwit -rwarp 20 20 -root
xte "mousermove $(($SEG*1)) $(($SEG*-12))"
xte 'mouseclick 1'
xte "mousermove $(($SEG*6)) $(($SEG*8))"
xte 'mouseclick 1'
xte "mousermove $(($SEG*6)) $(($SEG*-11))"
xte 'mouseclick 1'
xte "mousermove $(($SEG*2)) $(($SEG*-4))"
xte 'mouseclick 1'
#Image2
if [ $canX > $canY ]; then
        let SEG2=$canY/130
else let SEG2=$canX/250
fi
origN2="xwit -warp $(($latP+$canX/2+60)) $(($heiC-$SEG2*30)) -root"
$black
xte 'mouseclick 1'
xte 'sleep 3'
$line
xte 'mouseclick 1'
$menuDwn
$menuDwn
$menuDwn
xte 'mouseclick 1'
$origP
for (( count=0; count < 7; count++)); do
$btnDwnP
done
xte 'sleep 3'
xte 'mouseclick 1'
xte 'sleep 1'
$origN2
xte "mousermove $(($SEG2*40)) $(($SEG2*-3))"
xte 'mouseclick 1'
xte "mousermove 0 $(($SEG2*-38))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*-13)) $(($SEG2*27))"
xte 'mouseclick 1'
xte 'mouseclick 2'
xte 'mouseclick 1'
xte "mousermove $(($SEG2*13)) $(($SEG2*-27))"
xte 'mouseclick 1'
xte "mousermove 0 $(($SEG2*19))"
xte 'mouseclick 1'
xte 'mouseclick 2'
xte 'mouseclick 1'
xte "mousermove 0 $(($SEG2*-19))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*24)) $(($SEG2*3))"
xte 'mouseclick 1'
xte 'mouseclick 2'
xte 'mouseclick 1'
xte "mousermove $(($SEG2*10)) $(($SEG2*-7))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*2)) $(($SEG2*-22))"
xte 'mouseclick 1'
xte 'mouseclick 2'
xte 'mouseclick 1'
xte "mousermove $(($SEG2*-12)) $(($SEG2*-9))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*-10)) $(($SEG2*6))"
xte 'mouseclick 1'
xte 'mouseclick 2'
xte 'mouseclick 1'
xte "mousermove 0 $(($SEG2*-24))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*10)) $(($SEG2*18))"
xte 'mouseclick 1'
xte 'mouseclick 2'
xte "mousermove $(($SEG2*-10)) $(($SEG2*-18))"
xte 'mouseclick 1'
xte "mousermove 0 $(($SEG2*24))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*-12)) $(($SEG2*-22))"
xte 'mouseclick 1'
xte 'mouseclick 2'
$origN2
xte "mousermove $(($SEG2*40)) $(($SEG2*-3))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*-13)) $(($SEG2*-12))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*-20)) $(($SEG2*-5))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*13)) $(($SEG2*12))"
xte 'mouseclick 1'
xte 'mouseclick 2'
xte "mousermove $(($SEG2*-13)) $(($SEG2*-12))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*20)) $(($SEG2*5))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*13)) $(($SEG2*-26))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*-21)) $(($SEG2*-3))"
xte 'mouseclick 1'
xte 'mouseclick 2'
xte 'mouseclick 1'
xte "mousermove $(($SEG2*-17)) $(($SEG2*-4))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*12)) $(($SEG2*15))"
xte 'mouseclick 1'
xte 'mouseclick 2'
xte "mousermove $(($SEG2*-12)) $(($SEG2*-15))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*17)) $(($SEG2*4))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*13)) $(($SEG2*-29))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*-17)) $(($SEG2*-3))"
xte 'mouseclick 1'
xte 'mouseclick 2'
xte 'mouseclick 1'
xte "mousermove $(($SEG2*17)) $(($SEG2*3))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*-3)) $(($SEG2*-5))"
xte 'mouseclick 1'
xte 'mouseclick 2'
xte "mousermove $(($SEG2*3)) $(($SEG2*5))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*21)) $(($SEG2*3))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*-13)) $(($SEG2*28))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*-8)) $(($SEG2*-11))"
xte 'mouseclick 1'
xte 'mouseclick 2'
xte 'mouseclick 1'
xte "mousermove $(($SEG2*-13)) $(($SEG2*9))"
xte 'mouseclick 1'
xte 'mouseclick 2'
xte "mousermove $(($SEG2*13)) $(($SEG2*-9))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*13)) $(($SEG2*2))"
xte 'mouseclick 1'
xte 'mouseclick 2'
xte "mousermove $(($SEG2*-13)) $(($SEG2*-21))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*-9)) $(($SEG2*-21))"
xte 'mouseclick 1'
xte 'mouseclick 2'
xte 'mouseclick 1'
xte "mousermove $(($SEG2*19)) $(($SEG2*1))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*12)) $(($SEG2*-2))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*-19)) $(($SEG2*-1))"
xte 'mouseclick 1'
xte 'mouseclick 2'
$origN2
xte "mousermove $(($SEG2*40)) $(($SEG2*-3))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*29)) $(($SEG2*-3))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*1)) $(($SEG2*-21))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*-30)) $(($SEG2*5))"
xte 'mouseclick 1'
xte 'mouseclick 2'
xte "mousermove $(($SEG2*30)) $(($SEG2*-5))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*-9)) $(($SEG2*-9))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*-8)) $(($SEG2*6))"
xte 'mouseclick 1'
xte 'mouseclick 2'
$origP
for (( count=0; count<9; count++ )); do
$btnDwnP
done
xte 'mouseclick 1'
$ltBlu
xte 'mouseclick 1'
$origN2
xte "mousermove $(($SEG2*35)) $(($SEG2*-5))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*3)) $(($SEG2*-25))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*5)) $(($SEG2*-2))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*10)) $(($SEG2*-15))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*10)) $(($SEG2*-20))"
xte 'mouseclick 1'
xte "mousermove 0 $(($SEG2*-5))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*-5)) $(($SEG2*-5))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*-20)) 0"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*-12)) $(($SEG2*2))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*-3)) $(($SEG2*10))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*-10)) $(($SEG2*23))"
xte 'mouseclick 1'
$origN2
xte "mousermove $(($SEG2*50)) $(($SEG2*-8))"
xte 'mouseclick 1'
xte "mousermove $(($SEG2*10)) $(($SEG2*-25))"
xte 'mouseclick 1'
$grey
xte 'mouseclick 1'
$origN2
xte 'mouseclick 1'
$origN
user/bewanyk/portfolio/autodraw.txt · Last modified: 2011/05/20 14:34 by bewanyk