• prompt> circuitbuilder
• 0. and
• 1. or
• 2. inverter
• command: add and
• command: add and
• command: add or
• command: add inverter
• command: show
• current circuit
• composite: 4 gates, 0 in wires, 0 out wires
• all-in
• all-out
• and (1)
• in (wire 8) (wire 9) out (wire 10)
• –
• and (2)
• in (wire 11) (wire 12) out (wire 13)
• –
• or (1)
• in (wire 14) (wire 15) out (wire 16)
• –
• inv (1)
• in (wire 17) out (wire 18)
• –
• connections: none
• command: connect 10 17
• command: connect 18 12
• command: connect 16 11
• command: connect 14 8
• command: connect 9 15
• command: in 14
• command: in 9
• command: out 13
• command: out 10
• command: test
• testing composite: 4 gates, 2 in wires, 2 out wires
• –
• 00 : 00
• 10 : 10
• 01 : 10
• 11 : 01
• –
• command: stop
• name for circuit: half
• command: add half
• command: add half
• command: add or
• command: show
• current circuit
• composite: 3 gates, 0 in wires, 0 out wires
• all-in
• all-out
• composite: 4 gates, 2 in wires, 2 out wires
• all-in (wire 25) (wire 20)
• all-out (wire 24) (wire 21)
• output elided/removed
• –
• composite: 4 gates, 2 in wires, 2 out wires
• all-in (wire 36) (wire 31)
• all-out (wire 35) (wire 32)
• output elided/removed
• –
• or (4)
• in (wire 41) (wire 42) out (wire 43)
• connections: none
• command: connect 24 31
• command: connect 21 42
• command: connect 32 41
• command: in 36
• command: in 25
• command: in 20
• command: out 35
• command: out 43
• command: test
• testing composite: 3 gates, 3 in wires, 2 out wires
• —
• 0 0 0 : 0 0
• 1 0 0 : 1 0
• 0 1 0 : 1 0
• 1 1 0 : 0 1
• 0 0 1 : 1 0
• 1 0 1 : 0 1
• 0 1 1 : 0 1
• 1 1 1 : 1 1
• —

command: stop name for circuit: full command: add gate name: 0. and 1. or 2. inverter 3. half 4. full

gates (clear register): ANDING 0's for all the binary sets
gates (invert register): NOT the results for all the binary sets
gates (copy register): EQUALS the results for all the binary sets
gates (switching/rotating register): REVERT the results for all the binary sets