User Tools

Site Tools


Sidebar

projects

cci0 (due 20170826)
wcp1 (due 20170826)
dtr0 (due 20170830)
wcp2 (due 20170902)
sof0 (due 20170906)
wcp3 (due 20170909)
dow0 (due 20170913)
wcp4 (due 20170916)
mbe0 (due 20170920)
wcp5 (due 20170923)
cbf0 (due 20170927)
wcp6 (due 20170930)
cos0 (due 20171004)
wcp7 (due 20171007)
pnc0 [metrics] (due 20171018)
mbe1 (BONUS – due 20171018)
wcp8 (due 20171021)
pnc1 [metrics] (due 20171025)
wcp9 (due 20171028)
gfo0 (due 20171101)
wcpA (due 20171104)
gfo1 (due 20171108)
wcpB (due 20171111)
gfo2 (due 20171115)
wcpC (due 20171118)
haas:fall2017:cprog:projects:pnc2

Corning Community College

CSCS1320 C/C++ Programming

~~TOC~~

Project: OPTIMIZING ALGORITHMS WITH SPACE - PRIME NUMBER CALCULATION (pnc2)

Objective

To apply your skills in algorithmic optimization through the implementation of improved prime number calculating programs.

Algorithmic Complexity

A concept in Computer Science curriculum is the notion of computational/algorithmic complexity.

Basically, a solution to a problem exists on a spectrum of efficiency (typically constrained by time vs. space): if optimizing for time, the code size tends to grow.

In the previous projects, we focused on algorithms that were constrained by time- taking progressively more time the larger the data set to be processed. These time-constrained algorithms also happens to be the type of algorithm you're most familiar with (at least, were indoctrinated into thinking… your third grade self potentially would have found more familiarity with these space-constrained methods).

In contrast to time-constrained approaches we have space-constrained approaches, which will utilize more space in the solving of the program to the benefit of requiring less time.

We can never be entirely time- or space-constrained… some element of the other will always be present. But by embracing the advantages of an approach, we can really make an impact in the desired area.

What we will be looking at in this project is a type of prime number calculating algorithm known as a sieve. It will utilize space in solving the problem instead of exclusively using time.

Optimizing the prime number calculation

Following will be the optimized algorithms I'd like you to implement for comparison with all the others.

For this project, please assume the following:

  • you are doing all values (odds AND evens).
  • if you exceed 64 million and get “–error!—” that's okay. I have memory limits in place (just like I have time limits in place).
  • if applicable, you can base your code on primebruteopt, but you may find the sieve algorithms to be different enough where you may not want to adapt existing code, but start fresh.

your own optimizations (primeopt)

The first program to consider for this project offers you a chance to try out your own algorithm-optimizing skills. In both pnc0 and pnc1, you implemented various approaches, often employing some very common sense improvements to the process.

Here, I want you to take that knowledge you've gained, and combined with your own numerical fluency, attempt to hash out your own optimized algorithm for computing primes, plotting its time performance out against your other implementations.

The primerun tool will recognize prime number calculating programs by the following names and process them accordingly:

  • primeopt
  • primeopt1
  • primeopt2
  • primeopt3
  • primeopt4

For credit, you only need to have ONE primeopt program… but these other slots are here should you wish to experiment.

NOTE: this is to be an implementation different from the others.

Compare your primeopt performance against that of the others to get a feel for how changes you make or implement impact overall runtime.

sieve of Eratosthenes (primesieveoferat)

The next program will be a sieve algorithm. We will be implementing one of the best known and likely longest-known sieves: the sieve of Eratosthenes.

The sieve, instead of calculating to determine the eligibility of a prime, works in a manner of marking off patterns of values that cannot be prime (so, it is composite-focused in approach vs. prime-focused).

In order for it to work, we must store all the values we're processing so we can obtain what is left when done– what remains are the prime values.

Here is the wikipedia page: https://en.wikipedia.org/wiki/Sieve_of_Eratosthenes

Here is an animated image of this sieve in action (from wikipedia):

This YouTube video may also be helpful:

Sieve of Eratosthenes

A basic outline of the algorithm (again, from the wikipedia page):

Overview of Algorithm

To find all the prime numbers less than or equal to a given integer n by Eratosthenes' method:

  1. Create a list of consecutive integers from 2 through n: (2, 3, 4, …, n).
  2. Initially, let p equal 2, the smallest prime number.
  3. Enumerate the multiples of p by counting to n from 2p in increments of p, and mark them in the list (these will be 2p, 3p, 4p, … ; the p itself should not be marked).
  4. Find the first number greater than p in the list that is not marked. If there was no such number, stop. Otherwise, let p now equal this new number (which is the next prime), and repeat from step 3.

When the algorithm terminates, the numbers remaining in the list that are not marked are the primes below n.

Program Implementation

This is a space-constrained algorithm, therefore we will need a chunk of space to store these values. Think about what a lot of this looks like with respect to how you know how to organize data.

sieve of Sundaram (primesieveofsund)

As with any approach, there are multiple ways to go about implementing it. Just as our brute force time-constrained algorithms could benefit from algorithmic optimizations, so too can our sieves.

The other program I would like you to write is an implementation of the sieve of Sundaram algorithm.

Here is the wikipedia page: https://en.wikipedia.org/wiki/Sieve_of_Sundaram

Here is an animated image of this sieve in action (from wikipedia):

Here's another page that discusses this sieve: Sieve of Sundaram

Overview of algorithm

  • Receive max value from command-line
  • Produce an array of the values from 0 to max.
  • Disqualify all values that are of the form (i + j + (2*i*j)), provided:
    • i and j are less than max
    • j is always greater than or equal to i
    • i is greater than or equal to 1 (one)
    • The equation (i + j + (2*i*j)) is less than or equal to max
  • Multiply the remaining numbers by 2, and add 1.

This process will yield prime numbers less than 2*max + 2.

Program

It is your task to write some optimized prime number calculating programs:

  1. primeopt.c: implementing an approach of your own
  2. primesieveoferat.c: using the space-oriented sieve algorithm
  3. primesieveofsund.c: another sieve

Your program should:

  • obtain 1 parameter from the command-line (see command-line arguments section below):
    • argv[1]: maximum value to calculate to (your program should run from (approximately) 2 through that number (inclusive of that number)
    • this value should be a positive integer value; you can make the assumption that the user will always do the right thing.
  • do the specified algorithmic optimizations
    • please take note in differences in run-time, contemplating the impact the various algorithms and approaches have on performance.
  • start your stopwatch (see timing section below):
  • perform the correct algorithm against the input
  • display (to STDOUT) the prime numbers found in the range
  • output the processing run-time to STDERR
  • your output MUST be conformant to the example output in the execution section below. This is also a test to see how well you can implement to specifications. Basically:
    • as primes are being displayed, they are space-separated (first prime hugs the left margin), and when all said and done, a newline is issued.
    • the timing information will be displayed in accordance to code I will provide (in the timing section).

Grabit Integration

For those familiar with the grabit tool on lab46, I have made some skeleton files and a custom Makefile available for this project.

To “grab” it:

lab46:~/src/cprog$ grabit cprog pnc2
make: Entering directory '/var/public/spring2017/cprog/pnc2'
‘/var/public/spring2017/cprog/pnc2/Makefile’ -> ‘/home/USERNAME/src/cprog/pnc2/Makefile’
‘/var/public/spring2017/cprog/pnc2/primeopt.c’ -> ‘/home/USERNAME/src/cprog/pnc2/primeopt.c’
‘/var/public/spring2017/cprog/pnc2/primesieveoferat.c’ -> ‘/home/USERNAME/src/cprog/pnc2/primesieveoferat.c’
‘/var/public/spring2017/cprog/pnc2/primesieveofsund.c’ -> ‘/home/USERNAME/src/cprog/pnc2/primesieveofsund.c’
make: Leaving directory '/var/public/spring2017/cprog/pnc2'
lab46:~/src/cprog$ cd pnc2
lab46:~/src/cprog/pnc2$ ls
Makefile  primeopt.c  primesieveoferat.c  primesieveofsund.c
lab46:~/src/cprog/pnc2$ 

Furthermore, if your pnc2/ project directory is next to a pnc1/ and pnc0/ directory, each containing those project's specific prime variants, you can symlink them into the current project directory with a make link:

lab46:~/src/cprog/pnc2$ make link
‘./primebrute.c’ -> ‘../pnc0/primebrute.c’
‘./primebruteopt.c’ -> ‘../pnc0/primebruteopt.c’
‘./primeodds.c’ -> ‘../pnc1/primeodds.c’
‘./primesqrt.c’ -> ‘../pnc1/primesqrt.c’
‘./primesqrtodds.c’ -> ‘../pnc1/primesqrtodds.c’
‘./primesqrtopt.c’ -> ‘../pnc1/primesqrtopt.c’
‘./primesqrtoptodds.c’ -> ‘../pnc1/primesqrtoptodds.c’
lab46:~/src/cprog/pnc2$ 

And, of course, your basic compile and clean-up operations:

  • make: compile everything
  • make debug: compile everything with debug support
  • make clean: remove all binaries

Just another “nice thing” we deserve.

NOTE: You do NOT want to do this on a populated pnc2 project directory– it will overwrite files. Only do this on an empty directory.

Command-Line Arguments

To automate our comparisons, we will be making use of command-line arguments in our programs. As we have yet to really get into arrays, I will provide you same code that you can use that will allow you to utilize them for the purposes of this project.

header files

We don't need any extra header files to use command-line arguments, but we will need an additional header file to use the atoi(3) function, which we'll use to quickly turn the command-line parameter into an integer, and that header file is stdlib.h, so be sure to include it with the others:

#include <stdio.h>
#include <stdlib.h>

setting up main()

To accept (or rather, to gain access) to arguments given to your program at runtime, we need to specify two parameters to the main() function. While the names don't matter, the types do.. I like the traditional argc and argv names, although it is also common to see them abbreviated as ac and av.

Please declare your main() function as follows:

int main(int argc, char **argv)

The arguments are accessible via the argv array, in the order they were specified:

  • argv[0]: program invocation (path + program name)
  • argv[1]: our maximum / upper bound

Simple argument checks

Although I'm not going to require extensive argument parsing or checking for this project, we should check to see if the minimal number of arguments has been provided:

    if (argc < 2)  // if less than 2 arguments have been provided
    {
        fprintf(stderr, "Not enough arguments!\n");
        exit(1);
    }

Grab and convert max

Finally, we need to put the argument representing the maximum value into a variable.

I'd recommend declaring a variable of type int.

We will use the atoi(3) function to quickly convert the command-line arguments into int values:

    max  = atoi(argv[1]);

And now we can proceed with the rest of our prime implementation.

Timing

Often times, when checking the efficiency of a solution, a good measurement (especially for comparison), is to time how long the processing takes.

In order to do that in our prime number programs, we are going to use C library functions that obtain the current time, and use it as a stopwatch: we'll grab the time just before starting processing, and then once more when done. The total time will then be the difference between the two (end_time - start_time).

We are going to use the gettimeofday(2) function to aid us in this, and to use it, we'll need to do the following:

header file

In order to use the gettimeofday(2) function in our program, we'll need to include the sys/time.h header file, so be sure to add it in with the existing ones:

#include <stdio.h>
#include <stdlib.h>
#include <sys/time.h>

timeval variables

gettimeofday(2) uses a struct timeval data type, of which we'll need to declare two variables in our programs (one for storing the starting time, and the other for the ending time).

Please declare these with your other variables, up at the top of main() (but still WITHIN main()– you do not need to declare global variables).

    struct timeval time_start; // starting time
    struct timeval time_end;   // ending time

Obtaining the time

To use gettimeofday(2), we merely place it at the point in our code we wish to take the time.

For our prime number programs, you'll want to grab the start time AFTER you've declared variables and processed arguments, but JUST BEFORE starting the driving loop doing the processing.

That call will look something like this:

    gettimeofday(&time_start, 0);

The ending time should be taken immediately after all processing (and prime number output) is completed, and right before we display the timing information to STDERR:

    gettimeofday(&time_end, 0);

Displaying the runtime

Once we having the starting and ending times, we can display this to STDERR. You'll want this line:

    fprintf(stderr, "%10.6lf\n", time_end.tv_sec - time_start.tv_sec + ((time_end.tv_usec - time_start.tv_usec) / 1000000.0));

For clarity sake, that format specifier is “%10.6lf”, where the “lf” is “long float”, that is NOT a number one but a lowercase letter 'ell'.

And with that, we can compute an approximate run-time of our programs. The timing won't necessarily be accurate down to that level of precision, but it will be informative enough for our purposes.

Execution

Your program output should be as follows (given the specified range):

lab46:~/src/cprog/pnc2$ ./primesieveoferat 90
2 3 5 7 11 13 17 19 23 29 31 37 41 43 47 53 59 61 67 71 73 79 83 89 
  0.000088
lab46:~/src/cprog/pnc2$ 

The execution of the programs is short and simple- grab the parameters, do the processing, produce the output, and then terminate.

Performance changes

You may notice a change with the sieves as compared to the other algorithms you've implemented with respect to performance- there will like be a lower bound of performance, ie you have to exceed a certain threshold before the algorithm truly enters its power band.

Check Results

If you'd like to compare your implementations, I rigged up a script called primerun which you can run.

In order to work, you MUST be in the directory where your previous prime programs are. What I do is symlink the sources or copy the binaries into my current directory (pnc2), so I both have access to everything, but everything is still categorized per project.

I'm not yet posting my primerun results; if you implement these correctly the results should speak for themselves.

lab46:~/src/cprog/pnc2$ primerun
COMING SOON
lab46:~/src/cprog/pnc2$ 

For evaluation, each test is run 4 times, and the resulting time is averaged. During development, I have it set to only run each test once.

If the runtime of a particular prime variant exceeds an upper threshold (likely to be set at 2 seconds), it will be omitted from further tests, and a series of dashes will instead appear in the output.

If you don't feel like waiting, simply hit CTRL-c and the script will terminate.

If the check is successful, you will see “OK” displayed beneath in the appropriate column; if unsuccessful, you will see “MISMATCH”.

Submission

To successfully complete this project, the following criteria must be met:

  • Code must compile cleanly (no warnings or errors)
  • Output must be correct, and match the form given in the sample output above.
  • Code must be nicely and consistently indented (you may use the indent tool)
  • Code must utilize the specifications/algorithm(s) presented above.
    • primeopt.c
    • primesieveoferat.c
    • primesieveofsund.c
  • Code must be commented
    • have a properly filled-out comment banner at the top
      • be sure to include any compiling instructions
    • have at least 20% of your program consist of //-style descriptive comments
  • Output Formatting (including spacing) of program must conform to the provided output (see above).
  • Track/version the source code in a repository
  • Submit a copy of your source code to me using the submit tool.

To submit this program to me using the submit tool, run the following command at your lab46 prompt:

$ submit cprog pnc2 primeopt.c primesieveoferat.c primesieveofsund
Submitting cprog project "pnc2":
    -> primeopt.c(OK)
    -> primesieveoferat.c(OK)
    -> primesieveofsund.c(OK)

SUCCESSFULLY SUBMITTED

You should get some sort of confirmation indicating successful submission if all went according to plan. If not, check for typos and or locational mismatches.

What I will be looking for:

52:pnc2:final tally of results (52/0)
*:pnc2:submit all programs with submit tool [1/0]
*:pnc2:primeopt.c no negative compiler messages [2/0]
*:pnc2:primeopt.c implements unique yet viable algorithm [4/0]
*:pnc2:primeopt.c adequate indentation and comments [3/0]
*:pnc2:primeopt.c output conforms to specifications [4/0]
*:pnc2:primeopt.c primerun runtime tests succeed [4/0]
*:pnc2:primesieveoferat.c no negative compiler messages [2/0]
*:pnc2:primesieveoferat.c implements only specified algorithm [4/0]
*:pnc2:primesieveoferat.c adequate indentation and comments [3/0]
*:pnc2:primesieveoferat.c output conforms to specifications [4/0]
*:pnc2:primesieveoferat.c primerun runtime tests succeed [4/0]
*:pnc2:primesieveofsund.c no negative compiler messages [2/0]
*:pnc2:primesieveofsund.c implements only specified algorithm [4/0]
*:pnc2:primesieveofsund.c adequate indentation and comments [3/0]
*:pnc2:primesieveofsund.c output conforms to specifications [4/0]
*:pnc2:primesieveofsund.c primerun runtime tests succeed [4/0]
haas/fall2017/cprog/projects/pnc2.txt · Last modified: 2017/03/08 13:52 by 127.0.0.1