Lab46 Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
=====Speaker Played through Raspberry Pi=====

Shawn and I worked together on operating a PC speaker using gpio pins. It was interesting the way that it worked. We had to figure out the amount of time it needed to sleep between turning the speaker on and off. We figured out the right amount of time by dividing the usleep time (1000000 microseconds, or 1 second) by the frequency of the specific note. Also, I made a countdown program for this as well! :D

The code:

<code c>
  1 #include "rpi.h"
  2 #include <stdlib.h>
  3 
  4 int main()
  5 {
  6 
  7     if(map_peripheral(&gpio) == -1)
  8     {
  9         printf("Failed to map the physical GPIO registers into the virtual memory space.\n");
 10         return -1;
 11     }
 12 
 13     int read = 0;
 14 
 15     INP_GPIO(18);
 16     OUT_GPIO(18);
 17 
 18     int countdown = 0;
 19 
 20     printf("Welcome to THE COUNTDOWN.\nHow long would you like to COUNT DOWN: ");
 21     scanf("%d", &countdown);
 22 
 23     printf("PREPARE FOR THE COUNTDOWN.\nStarting at: %u seconds\n\n", countdown);
 24 
 25     for(countdown; countdown >= 0; countdown--)
 26     {
 27         printf("%u\n", countdown);
 28         usleep(1000000);
 29     }
 30 
 31     printf("GAME OVER, BITCH.\n");
 32 
 33     while(1)
 34     {
 35 
 36         GPIO_SET = 1 <<  18;
 37         usleep(1136);
 38         read = GPIO_READ(18);
 39         read = read >> 18;
 40         printf("\nPIN: %u", read);
 41         GPIO_CLR = 1 <<  18;
 42         usleep(1136);
 43         read = GPIO_READ(18);
 44         read = read >> 18;
 45         printf("\nPIN: %u", read);
 46     }
 47 
 48     return(0);
 49 }
</code>
Lab46 Wiki

User Tools

Site Tools

Page Tools
