Lab46 Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
STARTING PINE:

Once you login to your account on lab46.corning-cc.edu you can start Pine.
At the system command prompt (lab46:~$) type pine <Enter>. The first time starting pine you will be ask to enter your password, this is the same password used to login to lab46.corning-cc.edu system.

Note: If you get a message about invalid password exit pine by typing **^C C then Q to exit**.  
When you are back at the command line run a script called fixmail this will correct a known 
problem. When back at the command promt enter pine again. 

Once it accept your password you will be ask if you want pine to remember your password, if you answer no it will ask for your password each time you start pine.

Pine's main menu appears on the screen and displays a list of Pine's main commands. Each command is preceded by a letter or symbol and this is the key you press to select the command. You can use uppercase or lowercase letters, and you do not need to press Enter to enable the command. You can use the command on the main menu to read on-line help, compose and send a message, look at an index of you mail messages, open and maintain your mail folders, update your Address book, configure or update Pine, and quit Pine. Pine's main menu looks similar to the following:
<code>

  ALPINE 1.10(962)   MAIN MENU            Folder: INBOX             3 Messages +


              ?     HELP               -  Get help using Alpine

              C     COMPOSE MESSAGE    -  Compose and send a message

              I     MESSAGE INDEX      -  View messages in current folder

              L     FOLDER LIST        -  Select a folder to view

              A     ADDRESS BOOK       -  Update address book

              S     SETUP              -  Configure Alpine Options

              Q     QUIT               -  Leave the Alpine program



                   Copyright 2006-2008 University of Washington

  ? Help                     P PrevCmd                 R RelNotes
  O OTHER CMDS > [ListFldrs] N NextCmd                 K KBLock
</code>

Quitting Pine:

When you finish working with Pine, issue the Quit command to leave the Pine program. From Pine's main menu screen, type Q to quit.
Composing a message in Pine:

To compose a message in Pine, you must be in the Compose Message screen. From Pine's main menu screen, press C (Compose). The Compose Message screen looks similar to the following:
<code
To      :
Cc      :
Attchmnt:
Subject :
----- Message Text -----















^G Get Help  ^X Send      ^R Rich Hdr  ^Y PrvPg/Top ^K Cut Line  ^O Postpone
^C Cancel    ^D Del Char  ^J Attach    ^V NxtPg/End ^U UnDel Line^T To AddrBk
</code>

The commands at the bottom of the screen are preceded by the caret (^) symbol. Remember, the caret (^) symbol represents the Ctrl key. This means you must hold down the Ctrl key while pressing the command letter. For example, in the Compose Message screen you would hold down the Ctrl key and then press G (Get Help) to view additional commands. You can use the directional arrow keys to move around the screen, or you can press ^N (Next line) to move to the next line and ^P (Previous line) to move to the previous line.

   * 1. Press C (Compose) to display the Compose Message screen.
   
   * 2. At the To: field, type johndoe@lab46.corning-cc.edu (his e-mail address) and press Enter.
  
   * 3. At the Cc: field, press Enter.

   * 4. At the Attachment: field, press Enter.
   
   * 5. At the Subject: field, type Test and press Enter.
   
   * 6. Below the Message Text line, type This is a test.

After you compose a message, you are ready to send it. 

NOTE: Remember that the caret (^) symbol means that you hold down the Ctrl key while typing the key it precedes 
   * Press (^X) which is displayed at the bottom of the screen to send your mail message. 
   * The message prompt Send message? appears on your screen. You must type 'Y' and press Enter to confirm the send.
   * The message is sent and a copy is saved to your sent-mail folder. Undeliverable messages are returned to your account.
   * You can also re-send messages by using the F (Forward) command. 
   * If you press ^X and then change your mind about sending the mail, at the following Send message? prompt, press n (no).
   * The mail message will not be sent and you can continue with your work.

Hints for writing a message:
   * Following the To: field, type the e-mail address of the intended recipient.
  
   * If you are sending a mail message to more than one person, you can type the
     address of each recipient, but you must separate each address with a comma.
     When you finish, press Enter.
  
   * If you are sending mail to someone who shares the same site address
   (e.g., lab46.corning-cc.edu), all you need to type is the person's userid.
   
   * Use the Cc: field when you want to send carbon copies of a mail message.
   Type the e-mail address of each person to whom you would like to send a
   copy of your message. Remember to separate each address with a comma. If
   you do not want to send carbon copies, simply press Enter to by-pass the
   Cc: field.

   * Attachment: This is an advanced Pine feature that allows you to attach files, including
   word processing documents and spreadsheets that you have uploaded, to your
   account. If you do not want to attach a file to your message, press Enter
   to by-pass the Attachment: field. For additional information, move to the
   Attachment: field and press ^G (Get Help).

   * Subject: This field is used to enter a one-line description of your mail message.

   * Message Text: This is the body of the email where you  type your message.
     To move around the screen use the directional arrow keys. To delete characters, use the
     Backspace or Delete key. To delete a line, press ^K.

Listing incoming messages:

Pine stores all the messages you receive (including those you send to yourself) in your INBOX folder. 
These messages remain in the INBOX folder until you decide to delete them or save them to some other folder.
To view the messages in your INBOX folders, from the Pine main menu, press I (Folder Index). An Inbox folder similar to the following will appear on your screen.

The selected message is highlighted. The first column displays the status of the message, for example, N indicates that it is an unread message, + indicates that the message was sent directly to you (it is not a copy), A indicates that you have replied to the message and D indicates that you have marked the message for deletion. The remaining columns display the message number, the date the message was sent, the sender, the size, and the subject. To store messages in a folder other than your Inbox, refer to the section titled “Moving Between Folders.”
Viewing a message:

To view a message:  - From the Folder Index screen, use the directional arrow keys to highlight the message you want to view. - Press V or > or Enter (ViewMsg) to read the currently selected message.  To view the next message, press N (NextMsg).  To return to the Folder Index, press I (Index).
Replying to a message:

You can reply to a message you have selected in the Folder Index screen, or you can reply to a message you  are viewing.  To reply to a message press R (Reply). You will receive a message asking you whether or not you would like to include the original message in your reply.  Also, if the original message was sent to more than one person, you will be asked if you would like to reply to all the recipients.   Answer y (yes) or n (no) and then type in your reply, press ^x to send.
Lab46 Wiki

User Tools

Site Tools

Page Tools
