Lab46 Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
======VM Server: Installation of i386 Debian/Linux 5.0.Squeeze(x64)======

HPC Fundamentals - Eric Scouten and Charlotte Gaines - Done 1/30/2013

=====Prerequisites=====
There are no prerequisites.

In order to successfully accomplish/perform this project, the listed resources/experiences need to be consulted/achieved:

^  Item  ^  Description  ^  Qty  ^
|  computer  |  Spare Project Computer  |  1  |
|  LCD  |  Spare LCD to use as display device  |  1+  |
|  keyboard  |  PS/2 or USB keyboard  |  1  |
|  mouse  |  PS/2 or USB mouse  |  1  |
|  working hard drive  |  working hard drive to install Linux on  |  1  |
|  working network cable  |  functioning network cable to plug into switch  |  1  |


=====Hardware SetUp=====
  * Make sure all of the cables and hardware are connected and seated properly
  * You need at least one stick of RAM.


=====BIOS Setup=====
  * Enter Setup using your designated BIOS setup key (Mine was F2)
  * Change the boot sequence to have the Network Device First.
  * Also, find your 'Integrated NIC(Network Interface Card)' option and be sure that it is set to 'On w/PXE' or similar applicable options, just make sure it's ON and has PXE On.
  * Save Changes and Proceed.

=====Network Install=====
  * At the Network Boot Menu select '64-bit (AMD)' and press <Enter>
  * Then select Debian and press <Enter>
  * Then select Squeeze and press <Enter>

=====Configuration and Installation=====
  * At the Select a Language menu select 'English - English' and press <Enter>.
  * At the Select your location menu select 'United States' and press <Enter>.
  * In the Select a Keyboard Layout menu select 'American English' and press <Enter>.
  * When prompted to enter a Server Hostname press <Enter> for the default. You may choose anything applicable.

====Configure the Network====
  * When prompted for a Domain Name verify that it is “projects.lab” and press <Enter>.
  * When prompted to choose a mirror site use the arrow keys to move to the top of the list and select 'enter information manually' then press <Enter>.
  * Enter the site name “mirror” and press <Enter>. Alternatively, you could type in the IP(10.80.2.3) of the mirror in instances where your DNS is broken.
  * Press <Enter> to use the default.
  * Press <Enter> with the line blank to select no HTTP Proxy.

====Account Setup====
  *  When prompted for the root password type “bob” and press <Enter>.
  * Reenter “bob” and press <Enter> to verify the root password.
  * Type the Full Name for your user account or “bob” and press <Enter>.
  * Type in the username for the new user or “bob” and press <Enter>.
  * Choose a password(preferably "bob") for the new user and press <Enter>.
  * Reenter the password and press <Enter> to verify.

====Clock Configuration====
  * Verify that the timezone highlighted is your timezone, if not use the arrow keys to select the correct timezone and press <Enter>.

=====Disk Partition=====
====Partition Disk====
  * Use the arrow keys to select 'Guided - Use entire disk' and press <Enter>.
  * When prompted to select disk to partition, select the appropriate disk (New disk you just installed) and press <Enter>.
  * For the Partitioning Scheme use the arrow keys to select 'All files in one partition (recommended for new users)' and press <Enter>.
  * Use the arrow keys to select 'Finish partitioning and write changes to disk' and press <Enter>.
  * Confirm your selection by using the arrow keys to select '<Yes>' and press <Enter>.
  * If you are asked about RAID software, select YES.

====Software Packages====
  * Use the arrow keys and <Space Bar> to deselect all options except for Systems Utility and SSH which should both be ENABLED, indicated with a '*'.
      * Once you made the proper selections, press ENTER
Lab46 Wiki

User Tools

Site Tools

Page Tools
