Lab46 Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

===== HPC EXPERIENCE II =====

TODAY WE DID STUFF, YAYYYZ FOR DOIN THE STUFFZZZZ

===but, in all seriousness===
We set up the neighbours for the OpenBSD router:

==1. setup static IP==

We had to set the static ip so that when called, the router would be under the same subnet, so that when we ssh into remotely, it will be where we think it is. 

<cli>

ifconfig eth0 inet 10.80.2.x netmask 255.255.255.0 up

</cli>

then we had to add the default to a setting:

<cli>
route add -net default gw 10.80.3.1
</cli>

==add the route==

The route will take anything coming from the router IP, and send it to the caprisun ROUTER

<cli>
route add -net 10.80.2/24 10.10.10.2
</cli>

==once the static route is set up==

su into root, cd into /etc
vi in bgpd.conf

then we changed the conf file to find the neighbors on startup by adding the ip addresses and subnet to each router/network.

Lab46 Wiki

User Tools

Site Tools

Page Tools