A project for CSCS1320S14 by Alana Whittier during the Spring Semester 2014.

This project was begun on February 6, 2014 and took approximately one week to complete since I had to familiarize myself with data types, format-specifiers, binary to hex conversion, two's complement, and bitwise and/or.

The purpose of this project was to become familiar with various data types, their sizes, and the range of values for each type. This project served as an exercise to explore the various format specifiers per data type and how to represent them in order to acquire the appropriate range of values using sizeof(), bitwise and/or (&/|), hex values, and type casting where necessary to display the negative values in the range for the signed data types.

In order to successfully accomplish/perform this project, the listed resources/experiences need to be consulted/achieved:

Helpful Resources referenced:

• http://en.cppreference.com/w/cpp/language/types1
• http://www.youtube.com/watch?v=SXAr35BiqK8
• http://www.binaryhexconverter.com/decimal-to-hex-converter
• http://en.wikipedia.org/wiki/Signed_number_representations
• email consultations and guidance from Matt Haas

Experiences:

• an understanding of data types, bitwise operators, and binary, decimal hex conversion
• ability to edit code
• ability to use lab46 remotely

State the idea or purpose of the project. What are you attempting to pursue?

Upon approval, you'll want to fill this section out with more detailed background information. DO NOT JUST PROVIDE A LINK.

Providing any links to original source material, such as from a project page, is a good idea.

You'll want to give a general overview of what is going to be accomplished (for example, if your project is about installing a web server, do a little write-up on web servers. What is it, why do we need one, how does it work, etc.)

Give a general overview of your anticipated implementation of the project. Address any areas where you are making upfront assumptions or curtailing potential detail. State the focus you will be taking in implementation.

State and justify the attributes you'd like to receive upon successful approval and completion of this project.

• attribute1: why you feel your pursuit of this project will gain you this attribute
• attribute2: why you feel your pursuit of this project will gain you this attribute
• etc…

The actual steps taken to accomplish the project. Include images, code snippets, command-line excerpts; whatever is useful for intuitively communicating important information for accomplishing the project.

<code c> ''/*datatypes.c - A Program to derive and display information;

              for the signed and unsigned data types in C.;

written by: Alana Whittier for CSCS1320S14;

on February 14, 2014;

Compile with: gcc -o datatypes datatypes.c; Execute with: ./datatypes */

#include <stdio.h>

int main() {

  unsigned char uchr = 0;  //unsigned char code
fprintf(stdout, "TYPE: %15s, ", "unsigned char"); //returns string
fprintf(stdout, "bytes: %lu, ", sizeof(uchr)); //returns number of bytes for unsigned char
fprintf(stdout, "low: %hhu, ", (uchr & 0X00)); //returns low value for unsigned char
fprintf(stdout, "high: %hhu, ", (uchr | 0XFF)); //returns high value for unsigned char
uchr = uchr -1; //decrement
fprintf(stdout, "qty: %hu\n", (uchr+1)); //performs increment first, then returns qty value

  signed char schr = 0;  //signed char code
  fprintf(stdout, "TYPE: %15s, ", "signed char"); //returns string
fprintf(stdout, "bytes: %lu, ", sizeof(schr)); //returns number of bytes for signed char
fprintf(stdout, "low: %hhd, ", (schr | -0X80)); //returns low value for signed char (need to type cast AND change to bitwise OR)
fprintf(stdout, "high: %hhd, ", (schr | 0X7F));//returns high value for signed char
schr = schr -1; //decrement
fprintf(stdout, "qty: %hu\n", (unsigned char) (schr+1)); //type cast to display negative values, perform increment, then display qty
  
  unsigned short int usi = 0;  //unsigned short int code
  fprintf(stdout, "TYPE: %18s, ", "unsigned short int");//returns string
fprintf(stdout, "bytes: %lu, ", sizeof(usi)); //returns number of bytes for unsigned short int
fprintf(stdout, "low: %hu, ", (usi & 0X00)); //returns low value for unsigned short int
fprintf(stdout, "high: %hu, ", (usi | 0XFFFF));//returns high value for unsigned short int
usi = usi -1; //decrement
fprintf(stdout, "qty: %hu\n", (usi+1)); //performs increment first, then returns qty value
  
  signed short int ssi = 0;  //signed short int code
  fprintf(stdout, "TYPE: %18s, ", "signed short int"); //returns string
fprintf(stdout, "bytes: %lu, ", sizeof(usi)); //returns number of bytes for signed short int
fprintf(stdout, "low: %hd, ", (ssi | -0X8000); //returns low value for signed short int (need to type cast AND change to bitwise OR)
fprintf(stdout, "high: %hd, ", (ssi | 0X7FFF)); //returns high value for signed short int
ssi = ssi -1; //decrement
fprintf(stdout, "qty: %hu\n", (unsigned short int) (ssi+1)); //type cast to display negative value, perform increment, then display qty
  
  unsigned int ui = 0;  //unsigned int code
  fprintf(stdout, "TYPE: %18s, ", "unsigned int"); //return string
  fprintf(stdout, "bytes: %lu, ", sizeof(ui)); //return number of bytes for unsigned int
fprintf(stdout, "low: %u, ", (ui & 0X00)); //returns low value for unsigned int 
fprintf(stdout, "high: %u, ", (ui | 0XFFFFFFFF)); //returns high value for unsigned int
ui = ui -1; //decrement
fprintf(stdout, "qty: %u\n", (ui+1)); //performs increment first, then returns qty value
  
  signed int si = 0;  //signed int code
  fprintf(stdout, "TYPE: %18s, ", "signed int"); //returns string
  fprintf(stdout, "bytes: %lu, ", sizeof(si)); //returns number of bytes for signed int
fprintf(stdout, "low: %d, ", (si | -0X80000000); //returns low value for signed int (need to type cast AND change to bitwise OR)
fprintf(stdout, "high: %d, ", (si | 0X7FFFFFFF)); //returns high value for signed int
si = si -1;
fprintf(stdout, "qty: %u\n", (unsigned int) (si+1)); //type cast to display negative value, perform increment, then display qty

  unsigned long int uli = 0;  //unsigned long int code
  fprintf(stdout, "TYPE: %18s, ", "unsigned long int"); //returns string
  fprintf(stdout, "bytes: %lu, ", sizeof(uli)); //returns number of bytes for unsigned long int
fprintf(stdout, "low: %lu, ", (uli & 0X00)); // returns low value for unsigned long int
fprintf(stdout, "high: %lu, ", (uli | 0XFFFFFFFFFFFFFFFF)); //returns high value for unsigned long int
uli = uli -1; //decrement
fprintf(stdout, "qty: %lu\n", (uli+1)); //performs increment first, then displays qty
  
  signed long int sli = 0;  //signed long int code
  fprintf(stdout, "TYPE: %18s, ", "signed long int"); //returns string
  fprintf(stdout, "bytes: %lu, ", sizeof(sli)); //returns number of bytes for signed long int
fprintf(stdout, "low: %ld, ", (sli | -0X8000000000000000)); //returns low value for signed long int (need to type cast AND change to bitwise OR)
fprintf(stdout, "high: %ld, ", (sli | 0X7FFFFFFFFFFFFFFF)); //returns high value for signed long int
sli = sli -1; //decrement
fprintf(stdout, "qty: %lu\n", (unsigned long int) (sli+1)); //type cast to display negative value, perform increment, then display qty

  unsigned long long int ulli = 0;  //unsigned long long int code
  fprintf(stdout, "TYPE: %18s, ", "unsigned long long int"); //returns string
  fprintf(stdout, "bytes: %llu, ", sizeof(uli)); //returns number of bytes for unsigned long long int
fprintf(stdout, "low: %llu, ", (uli & 0X00)); //returns low value for unsigned long long int
fprintf(stdout, "high: %llu, ", (uli | 0XFFFFFFFFFFFFFFFF)); //returns high value for unsigned long long int
ulli = ulli -1; //decrement
fprintf(stdout, "qty: %llu\n", (uli+1)); //performs increment first, then displays qty
  
  signed long long int slli = 0;  //signed long long int code
  fprintf(stdout, "TYPE: %18s, ", "signed long long int"); //returns string
  fprintf(stdout, "bytes: %lu, ", sizeof(slli)); //returns number of bytes for signed long long int
fprintf(stdout, "low: %lld, ", (slli | -0X8000000000000000)); //returns low value for signed long long int (need to type cast AND chage to bitwise OR)
fprintf(stdout, "high: %lld, ", (slli | 0X7FFFFFFFFFFFFFFF)); //returns high value for signed long long int
slli = slli -1; //decrement
fprintf(stdout, "qty: %lu\n", (unsigned long long int) (slli+1)); //type cast to display negative value, perform increment, then display qty

}

lab46:~/src/cscs1320$ nano datatypesM-D.c
lab46:~/src/cscs1320$ gcc -o datatypesM-D datatypesM-D.c
lab46:~/src/cscs1320$ ./datatypesM-D
TYPE: unsigned char, bytes: 1, low: 0, high: 255, qty: 256
TYPE:   signed char, bytes: 1, low: -128, high: 127, qty: 256
TYPE: unsigned short int, bytes: 2, low: 0, high: 65535, qty: 0
TYPE:   signed short int, bytes: 2, low: -32768, high: 32767, qty: 0
TYPE: unsigned int, bytes: 4, low: 0, high: 4294967295, qty: 0
TYPE:   signed int, bytes: 4, low: -2147483648, high: 2147483647, qty: 0
TYPE: unsigned long int, bytes: 8, low: 0, high: 18446744073709551615, qty: 0
TYPE:   signed long int, bytes: 8, low: -9223372036854775808, high: 9223372036854775807, qty: 0
TYPE: unsigned long long int, bytes: 8, low: 0, high: 18446744073709551615, qty: 0
TYPE:   signed long long int, bytes: 8, low: -9223372036854775808, high: 9223372036854775807, qty: 0

Comments/thoughts generated through performing the project, observations made, analysis rendered, conclusions wrought. What did you learn from doing this project?

In performing this project, the following resources were referenced:

• http://en.cppreference.com/w/cpp/language/types1
• http://www.youtube.com/watch?v=SXAr35BiqK8
• http://www.binaryhexconverter.com/decimal-to-hex-converter
• http://en.wikipedia.org/wiki/Signed_number_representations