Lab46 Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
======DEF0======

=====Set Drawing Points=====
Stripping away all the fluff with the stack in essence all you need to set your drawing points are

1. Select your region
<code asm>
out GPU_SelectedRegion, R# ; register which holds the value for the region
</code>

2. Set your drawing points
<code asm>
out GPU_DrawingPointX, R# ; register that holds the X value
out GPU_DrawingPointY, R# ; register that holds the Y value
</code>

3. Draw your stuff
<code asm>
out GPU_Command, GPUCommand_DrawRegion
</code>

It may prove useful to slap these commands into a subroutine, preferably with a nice name for easy tracking when debugging.
=====Select Texture=====
When selecting a texture it is similar to C but is far more simplified. Normally, in C you would do the following:
<Code C>
#define Texture 0
</Code>

In asm this translates to the following:
<Code asm>
mov R7, 0
out GPU_SelectedTexture, R7
</Code>

What is happening in the above snip of code is that we are putting in our number ID for our texture into register 7 and then feeding R7 into the GPU_SelectedTexture.

=====Select Region=====
After you have successfully selected your texture you need to select a region inside your texture file. To accomplish this in asm you are repeating similar steps as to selecting a texture. Here is a sample of what that would look like:
<Code asm>
mov R7, 1
out GPU_SelectedRegion, R7
</Code>

Similarly to above, we are putting the id for a region into R7 and then feeding R7 into GPU_SelectedRegion. 

=====Drawing Regions=====
Before a region can be drawn, its borders have to be defined within the texture file.

This is done similarly to the define_region functions in C:
<code C>
define_region(minX, minY, maxX, maxY, hotspotX, hotspotY);
</code>

Except that here, you have to input each coordinate value individually, including the hotspots.

Getting only the necessary lines from the compiled code, defining a region would look like so:
<code asm>
out GPU_RegionMinX, R?
out GPU_RegionMinY, R?
. . .
out GPU_RegionHotSpotY, R?
</code>

Where "R?" refers to the register that stores that specific coordinate.

To display your regions you have to say where you want to display the region. That is done by putting in values for X and Y into 2 different registers. Here is what that looks like:

<Code asm>
mov R2, 20 ; X coordinate
mov R3, 40 ; Y coordinate
</Code>
=====Read from Gamepad=====

First off you want to select the gamepad. The best way to do this would be:
  mov R0, 0
  out INP_SelectedGamepad, R0
this would select gamepad 0 for the currently selected gamepad.

Next you would want to make your gamepad direction functions and read into them the current gamepad direction. The best way to do this would be:
<code bash>
__left:                            ;Left Function
  in R10, INP_GamepadLeft          ;Gamepad state is loaded into R10 and will return a value
  mov R4, 0                        ;Put 0 into R4 to rest its value
  ilt R4, R10                      ;If R4 < R10
  jf R4, __right                   ;If it is false then go to the right function
  mov R8, 1                        ;Assigning region value that will print the region you want to print when going left
  isub R2, 1                       ;If it is true then subtract one value from R2 which would be the sprites X
</code>
When you reach the last direction instead of putting
<code bash>
  jf R4, __direction
</code>
You should do:
<code bash>
  jf R4, __function_gamepad_direction_return
</code>
or whatever the end of your function or loop is called.
As long as you don't modify R2 between now and using R2 to in printing your texture then it will print at R2.
=====Comparisons=====
On the Vircon specifications page, one can find a list of comparison evaluations. A few examples include:
   "ilt" -> "integer less than"
   "ieq" -> "integer equal to"
   "ige" -> "integer greater than or equal to"

    mov R0, 13
    ilt R0, 14 ; would set the value in R0 to 0 as the result of the comparison is true.


*One needs to keep in mind that when these comparisons are passed, they are replaced with a resulting value, like 1 or 0. So do be careful when comparing a register to an integer or another register.

**A good idea is to move the value one wants evaluated to another register and have the second one evaluated, as to not overwrite memory and cause oneself trouble
=====Loops=====
While there are no loops as we recognize from C, (while, do while, for) we have the equivalent of the infamous go-to.\\ 
Further up in the Gamepad section we used the conditional jumps which are in essence a type of boolean loop.

The main loop that will run this and future programs is a well placed unconditional jump 
<code asm>
jmp __label
</code> 
where your label would be somethin akin to ''_main_loop''

You'd also need a label such like ''_end_main_loop'' which would hold your ''hlt'' command

=====TASK=====
Implemented from scratch, in assembly:

  * select the loaded texture
  * select 4 objects (regions) to display
  * display the object on the screen, allowing for its control via the gamepads
    * each gamepad direction should display a different object
  * implement bounds checks on the screen edges, preventing the object from moving off the screen
Lab46 Wiki

User Tools

Site Tools

Page Tools
