Differences

This shows you the differences between two versions of the page.

--- notes:c4eng:fall2022:projects:fso2 [2022/11/29 19:17] – [DEMONSTRATION] dfabbri
+++ notes:c4eng:fall2022:projects:fso2 [2022/12/02 00:10] (current) – [DEMONSTRATION] cmille71
@@ Line 57: / Line 57: @@
 ====DEMONSTRATION====
 {{:notes:c4eng:fall2022:projects:image_67210497.jpg?400|}}
-=====PROJECT 8=====
+=====Thrust Vector Control (TVC) Mount=====
 ====DESCRIPTION====
+In this project, I used the Adafruit Gy-521 and two Servos. These electronics were used for the goal of making sure that a model rocket is properly orientated during its flight and guaranteeing a nominal trajectory for it.
-====DEMONSTRATION====
+The GY-521 is an accelerometer/gyroscope that will detect a change in the orientation of the craft as it is flying and will send a signal to the Arduino that the orientation of the craft is off. This will then send a signal to the servos that the orientation is off and needs to be fixed. Determining how much of a correction needs to be made is determined by a Proportional Integral Derivative (PID). A device that will automatically apply an accurate and responsive correction to a control function. This basically determines how fast/ intensely the servo responds to an error in the orientation of the device.
 =====PROJECT 9=====

Lab46 Wiki