Differences

This shows you the differences between two versions of the page.

--- notes:c4eng:fall2022:projects:fso1 [2022/11/17 03:47] – [CIRCUIT] ajohns65
+++ notes:c4eng:fall2022:projects:fso1 [2022/11/17 14:07] (current) – [DEMONSTRATION] cmille71
@@ Line 307: / Line 307: @@
 {{:notes:c4eng:fall2022:projects:20221110_105850.jpg?400|}}
 ====DEMONSTRATION====
+{{ :notes:c4eng:fall2022:projects:20221116_224819_202914968439831.mp4 |}}
 =====PROJECT 8=====
@@ Line 342: / Line 342: @@
-=====PROJECT 11=====
+==========Model Rocket Thrust Vector Control (TVC)============
 ====OVERVIEW====
+In this project, I used the Adafruit Gy-521 and two Servos. These electronics were used for the goal of making sure that a model rocket is properly orientated during its flight and guaranteeing a nominal trajectory for it.
-====CIRCUIT====
+The GY-521 is an accelerometer/gyroscope that will detect a change in the orientation of the craft as it is flying and will send a signal to the Arduino that the orientation of the craft is off. This will then send a signal to the servos that the orientation is off and needs to be fixed. Determining how much of a correction needs to be made is determined by a Proportional Integral Derivative (PID). A device that will automatically apply an accurate and responsive correction to a control function. This basically determines how fast/ intensely the servo responds to an error in the orientation of the device.
-====DEMONSTRATION====
 =====PROJECT 12=====

Lab46 Wiki