Lab46 Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
<WRAP centeralign round box>
<WRAP><color red><fs 200%>Corning Community College</fs></color></WRAP>
<WRAP><fs 150%>CSCS2320 Data Structures</fs></WRAP>
</WRAP>

~~TOC~~

======Project: SLL2======

=====Errata=====
This section will document any updates applied to the project since original release:

  * __revision #__: <description> (DATESTRING)

=====Objective=====
In this project, we complete the node transactions core of our singly-linked list implementation by exploring the remaining functions: **obtain()**, **clearlist()**, **rmlist()**, **swapnode()**, and **sortlist()**
=====Project Overview=====

For this project, we're going to be implementing the following functions:

<code c>
List *obtain (List *, Node **);         // obtain/disconnect node from list
List *clearlist(List *);                // empty an existing list
List *rmlist(List *);                   // deallocate list
List *swapnode(List *, Node *, Node *); // swap positions of given nodes in list
List *sortlist(List *, int);            // sort list (according to mode)
</code>

====list library====
In **src/list/**, you will find 5 new C files:

  * **obtain.c**   - which will house the list obtain function (to disconnect nodes from a list)
  * **clear.c**    - which will handle clearing (emptying) the list
  * **rm.c**       - which will handle deallocating (purging) the list 
  * **swap.c**     - which will handle swapping two nodes within a list
  * **sort.c**     - which will house the list sort function

Take a look at the code there. These are the files that contain functions which will be compiled and archived into the list library (**liblist.a**) we will be using in this and future projects.

Figure out what is going on, make sure you understand it.

====List library unit tests====
In **unit/list/**, you will find these new files:

  * **unit-obtain.c**     - unit test for **obtain()** library function
  * **unit-clearlist.c**  - unit test for **clearlist()** library function
  * **unit-rmlist.c**     - unit test for **rmlist()** library function
  * **unit-swapnode.c**   - unit test for **swapnode()** library function
  * **unit-sortlist.c**   - unit test for **sortlist()** library function

These are complete runnable programs (when compiled, and linked against the list library, which is all handled for you by the **Makefile** system in place).

Of particular importance, I want you to take a close look at:

  * the source code to each of these unit tests
    * the purpose of these programs is to validate the correct functionality of the respective library functions
    * follow the logic
    * make sure you understand what is going on
    * ask questions to get clarification!
  * the output from these programs once compiled and ran
    * analyze the output
    * make sure you understand what is going on
    * ask questions to get clarification!

====list testing applications====

===palindrome===
Now that we've completed our list functionality, we can use these individual functions to piece together solutions to various everyday problems where a list could be effective. After all, that's a big aspect to learning data structures- they open doors to new algorithms and problem solving capabilities.

Our first endeavor will be that of palindromes (ie words/phrases that, when reversed, spell the same thing).

This implementation will be considered an extra credit opportunity, so as to offer those who have fallen behind (but working to get caught up) a reprieve on some of the credit they've lost.

It is also highly recommended to undertake as it will give you further experience working with these concepts.

=====Expected Results=====
To assist you in verifying a correct implementation, a fully working implementation of the node library and list library (up to this point) should resemble the following:

====node library====
Here is what you should get for the node library:

<cli>
lab46:~/src/data/sll2$ bin/verify-node.sh 
====================================================
=    Verifying Singly-Linked Node Functionality    =
====================================================
 [mknode] Total:   4, Matches:   4, Mismatches:   0
 [cpnode] Total:   5, Matches:   5, Mismatches:   0
 [rmnode] Total:   2, Matches:   2, Mismatches:   0
====================================================
[RESULTS] Total:  11, Matches:  11, Mismatches:   0
====================================================
lab46:~/src/data/sll2$ 
</cli>

====list library====
Here is what you should get for all the functions completed so far in the list library (sll0+sll1+sll2):

<cli>
lab46:~/src/data/sll2$ bin/verify-list.sh 
======================================================
=     Verifying Singly-Linked List Functionality     =
======================================================
    [mklist] Total:   5, Matches:   5, Mismatches:   0
    [insert] Total:  11, Matches:  11, Mismatches:   0
  [displayf] Total:   4, Matches:   4, Mismatches:   0
    [getpos] Total:   8, Matches:   8, Mismatches:   0
    [setpos] Total:   9, Matches:   9, Mismatches:   0
    [append] Total:  11, Matches:  11, Mismatches:   0
[searchlist] Total:  11, Matches:  11, Mismatches:   0
    [cplist] Total:  11, Matches:  11, Mismatches:   0
  [displayb] Total:   6, Matches:   6, Mismatches:   0
   [compare] Total:  15, Matches:  15, Mismatches:   0
    [obtain] Total:  28, Matches:  28, Mismatches:   0
 [clearlist] Total:   3, Matches:   3, Mismatches:   0
    [rmlist] Total:   3, Matches:   3, Mismatches:   0
  [swapnode] Total:   9, Matches:   9, Mismatches:   0
  [sortlist] Total:  27, Matches:  27, Mismatches:   0
======================================================
   [RESULTS] Total: 161, Matches: 161, Mismatches:   0
======================================================
lab46:~/src/data/sll2$ 
</cli>
=====Submission=====
{{page>haas:summer2015:common:submitblurb#DATA&noheader&nofooter}}
Lab46 Wiki

User Tools

Site Tools

Page Tools
