Lab46 Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
<WRAP centeralign round box>
<WRAP><color red><fs 200%>Corning Community College</fs></color></WRAP>
<WRAP><fs 150%>CSCS1730 UNIX/Linux Fundamentals</fs></WRAP>
<fs 125%>Lab 0x2: Files and Directories</fs>
</WRAP>

~~TOC~~

=====Objective=====
To become familiar with the UNIX directory structure as well as file permissions.

=====Reading=====
In "UNIX for the Beginning Mage", please read:

  * Chapter 4 (pages 37-44).
  * Chapter 5 (pages 45-58).

In "Harley Hahn's Guide to UNIX and Linux", please read:

  * Chapter 23 ("The UNIX Filesystem", pages 627-658).
  * Chapter 24 ("Working with Directories", pages 659-714).
  * Chapter 25 ("Working with Files", pages 715-766).

In "Learning the UNIX Operating System, 5th Edition", please read:

  * Chapter 3 ("Using Your UNIX Account", pages 42-65).
=====Background=====

====Directories====
The UNIX filesystem is built on a hierarchical structure. The base, or root, directory is the starting point of the filesystem. It is identified by the /, which is also used as the directory separator. / is the lowest point on the filesystem- you cannot go beyond it.

From the base of the filesystem are the traditional subdirectories that contain the UNIX system as we know it. While there can be any number of directories, the traditional ones found include: **/bin**, **/etc**, **/home**, **/lib**, **/mnt**, **/root**, **/sbin**, **/tmp**, **/usr**, and **/var**.

Although many variations can occur, here is an example diagram of the filesystem structure on Lab46 (and with the exception of our /home directory tree, most everything else will be fairly standard across default Linux installs.

{{wiki:dirtree.png|Illustration of UNIX filesystem directory tree}}

Each directory will typically hold certain types of files, as seen below:

^  Directory  ^  Description  |
|  /bin  |  Essential basic tools for normal system usage  |
|  /etc  |  Configuration files  |
|  /home  |  Location of the system's user directories  |
|  /lib, /lib64, /lib32  |  Contains important system libraries  |
|  /mnt  |  Common place to mount additional filesystems  |
|  /root  |  The superuser's home directory  |
|  /sbin  |  Essential system administration utilities  |
|  /tmp  |  Temporary directory  |
|  /usr  |  Additional (secondary) system functionality & userspace tools  |
|  /var  |  Misc. items (mail files & databases)  |

^  1.  ^|Using the cd command, do the following:|
| ^  a.|Switch to the root (/) directory (aka base of the filesystem). How did you do it?|
|:::^  b.|Get a directory listing. Do you see the above-mentioned directories?|
|:::^  c.|Which ones have you dealt with in previous assignments?|
|:::^  d.|Try changing into these subdirectories and listing files. Are there any directories you are not allowed in? Which ones?|

====Home Directory====

Your home directory is the starting point of your login session. It contains customized login files as well as any personal files you have created while on the system. In Lab #0 you used the **pwd** utility to display the actual location of your home directory.

^  2.  ^|Do the following:|
| ^  a.|Change to the root (/) of the filesystem.|
|:::^  b.|Going step-by-step, show me how you would get back to your home directory. (ie do not use any directory separators (/), or any shortcuts (~ or just hitting **cd**)).|
|:::^  c.|Show how you accomplished this.|

<WRAP round warning box>NOTE: Do not just issue a **cd** and hit enter. I want you to trace your steps from the root of the filesystem to your home directory.</WRAP>

====Working Directory====

Your prompt reflects the current //working// directory. This is the directory you are currently located in on the filesystem. The **pwd** utility will display the full path of your working directory.

^  3.  ^|Do the following:|
| ^  a.|Change to the **/tmp** directory and run the **pwd** utility.|
|:::^  b.|What is your current working directory?|

====Pathnames====

Your book talks about two types of pathnames: **absolute** and **relative**.

An **absolute** pathname is a specific reference to a location on the filesystem. When you issue the **pwd** command, it returns the **absolute** pathname of your current location. When an **absolute** pathname is given, the final destination is immediately known.

For example: If you type "**cd /usr/bin**" at your prompt, it will take you to the **/usr/bin** directory, regardless of where you currently are. This is because you are giving a precise destination.

A **relative** pathname, on the other hand, refers to something reachable from your present location. A **relative** pathname's final destination isn't as defined. It only makes sense from the particular starting location.

For example: If you are in your home directory and type "**cd src**" at your prompt, you will be taken into your **src/** subdirectory. If you change to the root and again try to "**cd src**" the system will give you an error because there is no subdirectory in **/**.

^  4.  ^|For the following table, determine if the pathname is **absolute** or **relative**:|
| ^  a.|src|
|:::^  b.|../../../../../usr/etc/../man/man2|
|:::^  c.|/var/public/unix|
|:::^  d.|/usr/sbin|

====The . and .. files====

If you give **ls** the **-a** option while in any directory, you will notice that any given directory will have the **.** and **..** directories. These files serve a special meaning for directory & pathname navigation.

The **.** directory always refers to your current directory.

The **..** directory, on the other hand, refers to the previous (or parent) directory to your current directory. In Lab #0 you went to the .. directory while in your home directory to end up at **/home**.

Both **.** and **..** can be used as **relative** pathnames, as they direct you somewhere from your current position.

^  5.  ^|Record your current working directory and do the following:|
| ^  a.|Change to the "**.**" directory. Check your present working directory.|
|:::^  b.|Did it change? Explain.|
|:::^  c.|Change to the root (**/**) directory. Now change to the **..** directory.|
|:::^  d.|Has your directory changed? Explain.|

====Files====

Everything you encounter on the UNIX filesystem is a file. There are three types of files in UNIX: regular files, directories, and special files.

regular (or ordinary) files are the text and executable files we've been playing with.

A directory is merely a file that points to other files.

Special files consist of devices, network pipes, and sockets.

In __Learning the UNIX Operating System, 5th Edition__ on page 51, the "Type" column in figure 3-5 gives a clear indication from **ls** regarding what type of file is being listed. The **-** and **d** are the most common. Others seen include **l** for symbolic link, **b** for block device, **c** for character device, **p** for a pipe, and **s** for socket.

^  6.  ^|Using the **-l** (dash ell) option to **ls**, look at files __within__ the following directories and determine if they are predominantly **regular**, **directory**, or **special** files.|
| ^  a.|/var/log|
|:::^  b.|/dev|
|:::^  c.|/|
|:::^  d.|/etc/init.d|

====Permissions====

Going back to page 51, there is reference to a file's //access modes//. Page 57 also begins a section on //File Access Permissions//.

File Permissions allow for customized access to the files on a UNIX system, according to three levels of authority- **user**, **group**, and **other**. There are three modes of access for each category- **read**, **write**, and **execute/search**.

Observe the following table:

^Type  ^Description  |
|user (u)  |the user that owns the file  |
|group (g)  |the group that owns the file  |
|other (o)  |everyone else on the system that is not included in the top 2 categories. Commonly referred to as "world"  |

<WRAP round info box>Terminology: You **execute** files and **search** directories. Both are represented as the **x** bit.</WRAP>

Looking at the figure 3-5 in the book (or any output of **ls -l**), the first column of output consists of the file's //type// and //access modes//. There are nine places available for the //access modes//, which corresponds perfectly to the scheme described above. The first 3 places describe the file owner's permissions, the next three describe the file group's permissions, and the remaining three places describe what permissions anyone else on the system has.

^  7.  ^|Change to the **/usr/bin** directory and take a look at the permissions on the **vim** utility.|
| ^  a.|What user owns this file?|
|:::^  b.|What can the owner do with the file?|
|:::^  c.|What can the group do with the file?|
|:::^  d.|What can anyone else on the system do with the file?|

====Octal and Symbolic Permissions====

File permissions and attributes are dually hierarchial in UNIX. Not only do you have access control with regards to file ownership, there is also access control over file attributes (indicating what actions can be performed on the files).

It is with a combination of these two hierarchies that we get the UNIX file access structure.

Two methods exist for manipulating file access permissions, and both will be described here. The traditional method has involved the use of octal numbers, which as we will see below, nicely works to support the data we are representing.

To appeal to a more "user-friendly" environment, symbolic permissions are also present, which allow us to use specially designated symbols to manipulate the permissions.

Observe the following table:

|  ^  Octal  ^  Symbolic  ^Description  |
|read  |  4  |  r  |view / read the file  |
|write  |  2  |  w  |save / create / modify / delete the file  |
|execute / search  |  1  |  x  |run / parse through contents of a file  |

<WRAP round info box>NOTE: As explored above, a "directory" in UNIX is considered a type of file.</WRAP>

Be sure you read over the section on "File Attributes" in your text (pages 41-46).

Read access is represented by a **4**. Write access is a **2**, and Execute access is a **1**. To obtain the octal value, you add the necessary access bits together.

For example- if the owner of a text file can read and write it, they have both read (4) + write (2) = read/write (6) access to that file. If both the group and the world can only read (4) that same file, it is said that the file has permissions of **644**.

This information is displayed visually for you when using the -l option to the ls utility. A diagram of such appears as follows:

|  ^  user  ^  group  ^  world  |
|  -  |  r   w   x  |  r   w   x  |  r   w   x  |

Of course, under each field of "user", "group", or "world", you can have your desired settings of "read", "write", and "execute". Attributes left unset will be represented symbolically as a dash (-), and numerically as 0.

^  8.  ^|View the permissions of the following files and determine their octal permissions:|
| ^  a.|**/var/log/daemon.log**|
|:::^  b.|**/etc/resolv.conf**|
|:::^  c.|**/usr/bin/split**|
|:::^  d.|Your home directory|

Symbolic permissions in some respects are not as flexible as the octal permissions, but allow for easy changes of individual modes. Your textbooks explain and give examples of how to use the symbolic notation.

^  9.  ^|Using __**symbolic**__ notation:|
| ^  a.|How would you assign write permission to the world?|
|:::^  b.|How would you remove the execute bit from the owning group?|

The **chmod**(**1**) utility is used to change file permissions. It accepts both symbolic and octal permissions. Please be sure to reference its manual page for additional information.

The concepts presented here will be important in your usage of the system throughout the semester. Make sure you understand the material presented here, and to ask questions if something does not make sense.
=====Exercise=====

^  10.  ^|Using the **mkdir**(**1**) utility, create a directory named **lab2/** in your home directory. Then, using **chmod**(**1**), set the directory with **octal** permissions to the following criteria:|
| ^  a.|give the directory full read/write/search for the owning **user**|
|:::^  b.|no permissions for **group**|
|:::^  c.|and search-only permission for **other**|
|:::^  d.|What was the exact incantation used? (combine parts a-c into one command-line)|

As we discovered earlier in the lab, the UNIX filesystem is a hierarchical structure, starting at **/**, the root, and propagating from that point on.

Your home directory exists somewhere within this hierarchy, and so do the files within your home directory.

^  11.  ^|Do the following:|
| ^  a.|Draw an ASCII tree showing me your home directory within the UNIX directory structure.|
|:::^  b.|In addition to your home directory, show me 3 additional files and directories within it.|
|:::^  c.|Place your lovely drawing in this week's Opus entry. Make sure it looks okay.|

One thing you may have noticed is that at several different levels of the UNIX filesystem there are directories with identical names, such as **~/bin/**, **/bin/**, **/usr/bin/**, and **/usr/local/bin/**.

It is important to make this distinction between the various similarly-named directories located on the system as they reside in a path. Same name but different entities play an important role in many areas.

^  12.  ^|Explore the following:|
| ^  a.|Investigate the various "bin" directories on the system.|
|:::^  b.|Prove that they are all independent entities (give a couple examples of proof).|

======Conclusions======
This assignment has activities which you should tend to- document/summarize knowledge learned on your Opus.

As always, the class mailing list and class IRC channel are available for assistance, but not answers.
Lab46 Wiki

User Tools

Site Tools

Page Tools
