Lab46 Wiki

User Tools

Site Tools

You are here: start » haas » fall2020 » cprog » projects » cnv0
haas:fall2020:cprog:projects:cnv0

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
haas:fall2020:cprog:projects:cnv0 [2020/10/08 08:31] – [Verification] wedgehaas:fall2020:cprog:projects:cnv0 [2020/10/08 11:04] (current) – [Submission] wedge
Line 89: Line 89:
  
 Because there are 3 factor pairs, 12 would be considered an nary(3) value (or a tertiary number). Because there are 3 factor pairs, 12 would be considered an nary(3) value (or a tertiary number).
 +
 +=====grabit=====
 +There is a grabit for this project, which will provide you with some files pertinent for performing this project.
 +
 +Run '**grabit**' on lab46 in the appropriate manner to obtain the files.
 +
 +=====Compiling=====
 +Since there is a provided Makefile in the project grabit, we can use that to compile, either regularly:
 +
 +<cli>
 +yourpi:~/src/cprog/cnv0$ make
 +</cli>
 +
 +Or, with debugging support:
 +
 +<cli>
 +yourpi:~/src/cprog/cnv0$ make debug
 +</cli>
 +
 =====Program===== =====Program=====
 It is your task to write a program that, upon accepting various pieces of input from the user, computes the number of factor pairs of a given number, displaying its eligibility as a secondary number. It is your task to write a program that, upon accepting various pieces of input from the user, computes the number of factor pairs of a given number, displaying its eligibility as a secondary number.
Line 114: Line 133:
 ====Secondary number output==== ====Secondary number output====
 <cli> <cli>
-lab46:~/src/c4eng/cnv0$ ./cnv0+yourpi:~/src/cprog/cnv0$ ./cnv0
 Enter a number: 6 Enter a number: 6
 6 is a secondary number 6 is a secondary number
-lab46:~/src/c4eng/cnv0$ +yourpi:~/src/cprog/cnv0$ 
 </cli> </cli>
  
 ====Non-secondary number output==== ====Non-secondary number output====
 <cli> <cli>
-lab46:~/src/c4eng/cnv0$ ./cnv0+yourpi:~/src/cprog/cnv0$ ./cnv0
 Enter a number: 7 Enter a number: 7
 7 is NOT a secondary number 7 is NOT a secondary number
Line 129: Line 148:
 ====Additional outputs==== ====Additional outputs====
 <cli> <cli>
-lab46:~/src/c4eng/cnv0$ ./cnv0+yourpi:~/src/cprog/cnv0$ ./cnv0
 Enter a number: 8 Enter a number: 8
 8 is a secondary number 8 is a secondary number
-lab46:~/src/c4eng/cnv0$ ./cnv0+yourpi:~/src/cprog/cnv0$ ./cnv0
 Enter a number: 16 Enter a number: 16
 16 is NOT a secondary number 16 is NOT a secondary number
-lab46:~/src/c4eng/cnv0$ ./cnv0+yourpi:~/src/cprog/cnv0$ ./cnv0
 Enter a number: 21 Enter a number: 21
 21 is a secondary number 21 is a secondary number
-lab46:~/src/c4eng/cnv0$ +yourpi:~/src/cprog/cnv0$ 
 </cli> </cli>
  
 The execution of the program is short and simple- obtain the input, do the processing, produce the output, and then terminate. The execution of the program is short and simple- obtain the input, do the processing, produce the output, and then terminate.
- 
-=====grabit===== 
-There is a grabit for this project, which will provide you with some files pertinent for performing this project. 
- 
-Run '**grabit**' on lab46 in the appropriate manner to obtain the files. 
- 
-=====Compiling===== 
-Since there is a provided Makefile in the project grabit, we can use that to compile, either regularly: 
- 
-<cli> 
-lab46:~/src/cprog/cnv0$ make 
-</cli> 
- 
-Or, with debugging support: 
- 
-<cli> 
-lab46:~/src/cprog/cnv0$ make debug 
-</cli> 
  
 =====Reference===== =====Reference=====
Line 175: Line 176:
  
 <cli> <cli>
-lab46:~/src/cprog/cnv0$ make verify+yourpi:~/src/cprog/cnv0$ make verify
 [  1] you have: err, should be: err    [  2] you have:  no, should be:  no [  1] you have: err, should be: err    [  2] you have:  no, should be:  no
 [  3] you have:  no, should be:  no    [  4] you have: yes, should be: yes [  3] you have:  no, should be:  no    [  4] you have: yes, should be: yes
Line 194: Line 195:
 [ 33] you have: yes, should be: yes    [ 34] you have: yes, should be: yes [ 33] you have: yes, should be: yes    [ 34] you have: yes, should be: yes
 [ 35] you have: yes, should be: yes    [ 36] you have:  no, should be:  no [ 35] you have: yes, should be: yes    [ 36] you have:  no, should be:  no
-lab46:~/src/cprog/cnv0$ +yourpi:~/src/cprog/cnv0$ 
 </cli> </cli>
 +
 =====Submission===== =====Submission=====
 To successfully complete this project, the following criteria must be met: To successfully complete this project, the following criteria must be met:
Line 211: Line 213:
  
 <cli> <cli>
-$ submit c4eng cnv0 cnv0.c +lab46:~/src/cprog/cnv0$ make submit
-Submitting c4eng project "cnv0": +
-    -> cnv0.c(OK) +
- +
-SUCCESSFULLY SUBMITTED+
 </cli> </cli>
 +
 +And make sure you get no error messages.
  
 You should get some sort of confirmation indicating successful submission if all went according to plan. If not, check for typos and or locational mismatches. You should get some sort of confirmation indicating successful submission if all went according to plan. If not, check for typos and or locational mismatches.
Line 223: Line 223:
  
 <code> <code>
-78:cnv0:final tally of results (78/78)+91:cnv0:final tally of results (91/91) 
 +*:cnv0:resources obtained via grabit by Sunday before deadline [13/13]
 *:cnv0:proper error checking and status reporting performed [13/13] *:cnv0:proper error checking and status reporting performed [13/13]
 *:cnv0:correct variable types and name lengths used [13/13] *:cnv0:correct variable types and name lengths used [13/13]
haas/fall2020/cprog/projects/cnv0.1602160266.txt.gz · Last modified: 2020/10/08 08:31 by wedge