Differences

This shows you the differences between two versions of the page.

--- haas:fall2020:common:projects:led1 [2020/09/03 16:49] – [Objective] wedge
+++ haas:fall2020:common:projects:led1 [2021/09/05 10:01] (current) – external edit 127.0.0.1
@@ Line 106: / Line 106: @@
 {{ :haas:fall2020:common:projects:breadboardlogic.png?400 |}}
+Here's a good video overview of the functionality of a breadboard:
+  * https://www.youtube.com/watch?v=6WReFkfrUIk
 ====(1) T-cobbler and data cable====
 In your kit should be a T-shaped device (known as the "T-cobbler" with some aspect of pin names silkscreened on it, and a 40-pin ribbon cable). Colors may vary, but essentially it looks like this:
@@ Line 144: / Line 148: @@
 Take note of how everything is being plugged in, and what connection on the T-cobbler is being utilized.
-Notice how the circuit runs from ground to resistor to LED to pin "GPIO17/Physical pin 11/Wiring Pi pin 0"
+Notice how the circuit runs from ground to LED to resistor to pin "GPIO17/Physical pin 11/Wiring Pi pin 0"
 Please keep in mind:
@@ Line 310: / Line 314: @@
   * Solutions not utilizing indentation to promote scope and clarity will be subject to a 25% overall deduction
   * Solutions not organized and easy to read are subject to a 25% overall deduction