Differences

This shows you the differences between two versions of the page.

--- haas:fall2020:common:projects:led0 [2020/08/26 14:40] – external edit 127.0.0.1
+++ haas:fall2020:common:projects:led0 [2020/09/18 13:26] – [(1) breadboard] wedge
@@ Line 3: / Line 3: @@
 =====Objective=====
-To create a program that generates a unique pattern of lit LEDs on your pi based on constraints
+To successfully interface an LED to your pi and control it via software (commands, provided program)
 We also further utilize enforced time constraints, tying project credit to your starting on the project before the deadline (so be sure to plan accordingly!)
-{{page>haas:fall2020:common:projects:abstract}}
+=====Abstraction=====
+{{page>haas:fall2020:common:projects:abstraction&noheader}}
 =====Locational Awareness=====
@@ Line 105: / Line 106: @@
 {{ :haas:fall2020:common:projects:breadboardlogic.png?400 |}}
+Here's a good video overview of the functionality of a breadboard:
+  * https://www.youtube.com/watch?v=6WReFkfrUIk
 ====(1) T-cobbler and data cable====
 In your kit should be a T-shaped device (known as the "T-cobbler" with some aspect of pin names silkscreened on it, and a 40-pin ribbon cable). Colors may vary, but essentially it looks like this:

Lab46 Wiki