Lab46 Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
<WRAP centeralign round box>
<WRAP><color red><fs 200%>Corning Community College</fs></color></WRAP>
<WRAP><fs 150%>CSCS2320 Data Structures</fs></WRAP>
</WRAP>

======Project: SLL3======

=====Errata=====
This section will document any updates applied to the project since original release:

  * __revision #__: <description> (DATESTAMP)

=====Objective=====
This is a transitional project, making a few modifications to the list struct forcing some changes to a few functions so that we can better explore the next topic (in **sll4**).

As such, while this is a standalone project, it should be considered a small one, and one that is given out in combination with another (again: **sll4**), so be mindful of time management.

You will need to complete this project prior to upgrading to **sll4**.

=====Project Overview=====

====list.h====
For this project, we need to make a couple modifications to the list struct (which you can also check out in **inc/list.h**):

<code c>
//////////////////////////////////////////////////////////////////////
//
// list struct definition
//
struct list {
    Node              *lead;            // pointer to start of list
    Node              *last;            // pointer to end of list
    struct list       *next;            // pointer to the next list
    unsigned long int  qty;             // number of nodes in list
};
typedef struct list            List;    // cuz we deserve nice things
</code>

Specifically, we have an after pointer, so that we can point to an entirely separate list, along with a newly added **qty** variable, which will keep track of the number of nodes in the list.

To implement **qty**, all list functions that perform manipulations to the list will need to see some updating (**insert()**, **append()**, **obtain()**, and **mklist()**)

To implement the list's new **next** pointer, you'll want to enhance **mklist()** and **cplist()** accordingly.

=====Expected Results=====
To assist you in verifying a correct implementation, a fully working implementation of the node library, list library (with new modifications), and group library should resemble the following:

====list library====

===sll3 list functions===
Here is what you should get for the specific functions relevant to sll3:

<cli>
lab46:~/src/data/sll3$ make check
======================================================
=    Verifying Singly-Linked  List Functionality     =
======================================================
    [mklist] Total:  21, Matches:  21, Mismatches:   0
    [cplist] Total:  14, Matches:  14, Mismatches:   0
    [insert] Total:  21, Matches:  21, Mismatches:   0
    [append] Total:  21, Matches:  21, Mismatches:   0
    [obtain] Total:  44, Matches:  44, Mismatches:   0
======================================================
   [RESULTS] Total: 121, Matches: 121, Mismatches:   0
======================================================
lab46:~/src/data/sll3$ 
</cli>

===entire list===
Here is what you should get for all the functions completed so far in the list library (sll0+sll1+sll2+sll3):

<cli>
lab46:~/src/data/sll3$ bin/verify-list.sh
======================================================
=     Verifying Singly-Linked List Functionality     =
======================================================
    [mklist] Total:  21, Matches:  21, Mismatches:   0
    [insert] Total:  21, Matches:  21, Mismatches:   0
  [displayf] Total:  10, Matches:  10, Mismatches:   0
    [getpos] Total:   8, Matches:   8, Mismatches:   0
    [setpos] Total:   9, Matches:   9, Mismatches:   0
    [append] Total:  21, Matches:  21, Mismatches:   0
[searchlist] Total:  11, Matches:  11, Mismatches:   0
    [cplist] Total:  14, Matches:  14, Mismatches:   0
  [displayb] Total:  10, Matches:  10, Mismatches:   0
   [compare] Total:  15, Matches:  15, Mismatches:   0
    [obtain] Total:  44, Matches:  44, Mismatches:   0
 [clearlist] Total:   3, Matches:   3, Mismatches:   0
    [rmlist] Total:   3, Matches:   3, Mismatches:   0
  [swapnode] Total:   9, Matches:   9, Mismatches:   0
  [sortlist] Total:  27, Matches:  27, Mismatches:   0
======================================================
   [RESULTS] Total: 226, Matches: 226, Mismatches:   0
====================================================== 
lab46:~/src/data/sll3$ 
</cli>
=====Submission=====
{{page>haas:fall2018:common:submitblurb#DATA&noheader&nofooter}}
Lab46 Wiki

User Tools

Site Tools

Page Tools
