Lab46 Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

My notes on getting a CEPH cluster up and running using the 4 tiger machines.

===== June 1 =====

Got CEPH up and running today.

Finished installing two 500GB hard drives in tiger2.

Used a ceph.conf file partially based on this one: http://ceph.newdream.net/wiki/Installing_on_Debian

Those instructions were also very useful in setting everything up.

I also downloaded linux kernel 2.6.8 source, compiled it, and installed it on tiger1. You have to do this in order to get the CEPH module so you can mount ceph.


===== May 25 =====

Started by installing two 500gb hard drives into tiger1.

Following instructions on http://www.ece.umd.edu/~posulliv/ceph/cluster_build.html

Downloaded the source code for ceph and exported it over nfs so that the other computers will be able to use the same code.

Working on compiling kernel so I can enable CEPH in the kernel.
Using instructions here: https://docs.google.com/uc?export=download&id=0B_nTbpzPbbNJOTljYjVhNTQtOTgwYi00NTI4LThlOWEtZTFiOGEyOTE5MWIy to help with compiling the kernel.

Note: I'm installing kernel 2.6.30 because for apt couldn't download the source for 2.6.32

Nevermind. Found instructions at

Lab46 Wiki

User Tools

Site Tools

Page Tools