The following information was provided by Matt Haas (of Lab46 fame). Heretofore the following only existed in an email, and has been posted here for the sole reason that I would rather not lose it. (I have edited to make this conversationally independent)

The basic premise of the simulator, aside from any independent user interface, is that the bulk of the coding is rather repetitious. Interpreting instructions (in hex), has typically been done via a switch-case statement (a very big one), and in each case stanza the appropriate actions take place.

An example based on an imaginary CPU:

Let's say our CPU has four 8-bit registers:

1. Accumulator (A)
2. Data (D)
3. Program Counter (PC)
4. Instruction Register (IR)
5. Flags (F) - R R R R R R S Z (first six bits are reserved, last two are “sign” and “zero”)

The CPU has 8 bytes of memory (memory addresses 0x00 through 0x07)

Our CPU has one instruction, ADD, with three variations and thereby three hex codes of 0x1A, 0x1B, and 0x1C:

 0x1A: Add Accumulator and Data, store result in Accumulator
 0x1B: Add Accumulator and Immediate (user specified) value, store result in Accumulator
 0x1C: Add Accumulator and Memory location, store result in Accumulator

We'll have the following program in memory (address first, then instruction):

 0x00    0x1A
 0x01    0x1B
 0x02    0x03
 0x03    0x1C
 0x04    0x07
 0x05    0x00
 0x06    0x00
 0x07    0x42

Obviously in a real CPU there'd be far more instructions, and more things going on.

When the program starts, the registers have the following values:

 A: 0x06
 D: 0x02
 PC: 0x00 (program counter contains the address of the next instruction to execute)
 IR: 0x00 (nothing has happened yet)
 F: 0x00 (nothing has happened yet)

In our simulator, we'll want to read the next instruction located at the address stored in the program counter into the address register:

while (1)
{
   IR = *PC; (we grab the contents of the memory address to which PC is pointing)
   switch(IR)
   {
       increment = 1; // how much to increment the PC
       case 0x1A:
           A = A + D;
           if (A == 0) // result of operation was zero
               F = F | 0x01; (we OR the flags register, forcing the 'Z' bit high)
           else // result was non-zero
               F = F & 0xFE; (we AND the flags register, forcing the 'Z' bit low)

           if (A < 0) // result is a negative value
               F = F | 0x02; (we OR the flags register, forcing the 'S' bit high)
           else
               F = F & 0xFD; (we AND the flags register, forcing the 'S' bit low)
           break;

       case 0x1B:
           A = A + *(PC+1); // add accumulator to value stored in memory immediately following instruction
           if (A == 0) // result of operation was zero
               F = F | 0x01; (we OR the flags register, forcing the 'Z' bit high)
           else // result was non-zero
               F = F & 0xFE; (we AND the flags register, forcing the 'Z' bit low)

           if (A < 0) // result is a negative value
               F = F | 0x02; (we OR the flags register, forcing the 'S' bit high)
           else
               F = F & 0xFD; (we AND the flags register, forcing the 'S' bit low)
           increment = 2; // this instruction is 2 bytes
           break;

   case 0x1C:
           A = A + **(PC+1); // double dereference... first grab memory address, then dereference it
           if (A == 0) // result of operation was zero
               F = F | 0x01; (we OR the flags register, forcing the 'Z' bit high)
           else // result was non-zero
               F = F & 0xFE; (we AND the flags register, forcing the 'Z' bit low)

           if (A < 0) // result is a negative value
               F = F | 0x02; (we OR the flags register, forcing the 'S' bit high)
           else
               F = F & 0xFD; (we AND the flags register, forcing the 'S' bit low)
           increment = 2; // this instruction is 2 bytes
           break;

   default:
           // bad instruction
           break;
   }
   PC=PC+increment; // increment the program counter appropriately
}

This is a sample format for a dated entry. Please substitute the actual date for “Month Day, Year”, and duplicate the level 4 heading to make additional entries.

As an aid, feel free to use the following questions to help you generate content for your entries:

• What action or concept of significance, as related to the course, did you experience on this date?
• Why was this significant?
• What concepts are you dealing with that may not make perfect sense?
• What challenges are you facing with respect to the course?

Remember that 4 is just the minimum number of entries. Feel free to have more.

This is a sample format for a dated entry. Please substitute the actual date for “Month Day, Year”, and duplicate the level 4 heading to make additional entries.

As an aid, feel free to use the following questions to help you generate content for your entries:

• What action or concept of significance, as related to the course, did you experience on this date?
• Why was this significant?
• What concepts are you dealing with that may not make perfect sense?
• What challenges are you facing with respect to the course?

Remember that 4 is just the minimum number of entries. Feel free to have more.

This is a sample format for a dated entry. Please substitute the actual date for “Month Day, Year”, and duplicate the level 4 heading to make additional entries.

As an aid, feel free to use the following questions to help you generate content for your entries:

• What action or concept of significance, as related to the course, did you experience on this date?
• Why was this significant?
• What concepts are you dealing with that may not make perfect sense?
• What challenges are you facing with respect to the course?

Remember that 4 is just the minimum number of entries. Feel free to have more.

This is a sample format for a dated entry. Please substitute the actual date for “Month Day, Year”, and duplicate the level 4 heading to make additional entries.

As an aid, feel free to use the following questions to help you generate content for your entries:

• What action or concept of significance, as related to the course, did you experience on this date?
• Why was this significant?
• What concepts are you dealing with that may not make perfect sense?
• What challenges are you facing with respect to the course?

Remember that 4 is just the minimum number of entries. Feel free to have more.

Identification and definition of the chosen keyword.

If you wish to aid your definition with a code sample, you can do so by using a wiki code block, an example follows:

/*
 * Sample code block
 */
#include <stdio.h>
 
int main()
{
    return(0);
}

Identification and definition of the chosen keyword.

If you want to demonstrate something on the command-line, you can do so as follows:

lab46:~$ cd src
lab46:~/src$ gcc -o hello hello.c
lab46:~/src$ ./hello
Hello, World!
lab46:~/src$ 

Identification and definition of the chosen keyword. Substitute “keyword” with the actual keyword.

If you wish to aid your definition with a code sample, you can do so by using a wiki code block, an example follows:

/*
 * Sample code block
 */
#include <stdio.h>
 
int main()
{
    return(0);
}

Identification and definition of the chosen keyword. Substitute “keyword” with the actual keyword.

If you want to demonstrate something on the command-line, you can do so as follows:

lab46:~$ cd src
lab46:~/src$ gcc -o hello hello.c
lab46:~/src$ ./hello
Hello, World!
lab46:~/src$ 

Identification and definition of the chosen keyword. Substitute “keyword” with the actual keyword.

If you wish to aid your definition with a code sample, you can do so by using a wiki code block, an example follows:

/*
 * Sample code block
 */
#include <stdio.h>
 
int main()
{
    return(0);
}

Identification and definition of the chosen keyword. Substitute “keyword” with the actual keyword.

If you want to demonstrate something on the command-line, you can do so as follows:

lab46:~$ cd src
lab46:~/src$ gcc -o hello hello.c
lab46:~/src$ ./hello
Hello, World!
lab46:~/src$ 

Identification and definition of the chosen keyword. Substitute “keyword” with the actual keyword.

If you wish to aid your definition with a code sample, you can do so by using a wiki code block, an example follows:

/*
 * Sample code block
 */
#include <stdio.h>
 
int main()
{
    return(0);
}

Identification and definition of the chosen keyword. Substitute “keyword” with the actual keyword.

If you want to demonstrate something on the command-line, you can do so as follows:

lab46:~$ cd src
lab46:~/src$ gcc -o hello hello.c
lab46:~/src$ ./hello
Hello, World!
lab46:~/src$ 

Identification and definition of the chosen keyword. Substitute “keyword” with the actual keyword.

If you wish to aid your definition with a code sample, you can do so by using a wiki code block, an example follows:

/*
 * Sample code block
 */
#include <stdio.h>
 
int main()
{
    return(0);
}

Identification and definition of the chosen keyword. Substitute “keyword” with the actual keyword.

If you want to demonstrate something on the command-line, you can do so as follows:

lab46:~$ cd src
lab46:~/src$ gcc -o hello hello.c
lab46:~/src$ ./hello
Hello, World!
lab46:~/src$ 

Identification and definition of the chosen keyword. Substitute “keyword” with the actual keyword.

If you wish to aid your definition with a code sample, you can do so by using a wiki code block, an example follows:

/*
 * Sample code block
 */
#include <stdio.h>
 
int main()
{
    return(0);
}

Identification and definition of the chosen keyword. Substitute “keyword” with the actual keyword.

If you want to demonstrate something on the command-line, you can do so as follows:

lab46:~$ cd src
lab46:~/src$ gcc -o hello hello.c
lab46:~/src$ ./hello
Hello, World!
lab46:~/src$ 

State the course objective; define what that objective entails.

State the method you will use for measuring successful academic/intellectual achievement of this objective.

Follow your method and obtain a measurement. Document the results here.

Reflect upon your results of the measurement to ascertain your achievement of the particular course objective.

• How did you do?
• Room for improvement?
• Could the measurement process be enhanced to be more effective?
• Do you think this enhancement would be efficient to employ?
• Could the course objective be altered to be more applicable? How would you alter it?

What is the question you'd like to pose for experimentation? State it here.

Collect information and resources (such as URLs of web resources), and comment on knowledge obtained that you think will provide useful background information to aid in performing the experiment.

Based on what you've read with respect to your original posed question, what do you think will be the result of your experiment (ie an educated guess based on the facts known). This is done before actually performing the experiment.

State your rationale.

How are you going to test your hypothesis? What is the structure of your experiment?

Perform your experiment, and collect/document the results here.

Based on the data collected:

• was your hypothesis correct?
• was your hypothesis not applicable?
• is there more going on than you originally thought? (shortcomings in hypothesis)
• what shortcomings might there be in your experiment?
• what shortcomings might there be in your data?

What can you ascertain based on the experiment performed and data collected? Document your findings here; make a statement as to any discoveries you've made.

What is the question you'd like to pose for experimentation? State it here.

Collect information and resources (such as URLs of web resources), and comment on knowledge obtained that you think will provide useful background information to aid in performing the experiment.

Based on what you've read with respect to your original posed question, what do you think will be the result of your experiment (ie an educated guess based on the facts known). This is done before actually performing the experiment.

State your rationale.

How are you going to test your hypothesis? What is the structure of your experiment?

Perform your experiment, and collect/document the results here.

Based on the data collected:

• was your hypothesis correct?
• was your hypothesis not applicable?
• is there more going on than you originally thought? (shortcomings in hypothesis)
• what shortcomings might there be in your experiment?
• what shortcomings might there be in your data?

What can you ascertain based on the experiment performed and data collected? Document your findings here; make a statement as to any discoveries you've made.

If you're doing an experiment instead of a retest, delete this section.

If you've opted to test the experiment of someone else, delete the experiment section and steps above; perform the following steps:

Whose existing experiment are you going to retest? Prove the URL, note the author, and restate their question.

Evaluate their resources and commentary. Answer the following questions:

• Do you feel the given resources are adequate in providing sufficient background information?
• Are there additional resources you've found that you can add to the resources list?
• Does the original experimenter appear to have obtained a necessary fundamental understanding of the concepts leading up to their stated experiment?
• If you find a deviation in opinion, state why you think this might exist.

State their experiment's hypothesis. Answer the following questions:

• Do you feel their hypothesis is adequate in capturing the essence of what they're trying to discover?
• What improvements could you make to their hypothesis, if any?

Follow the steps given to recreate the original experiment. Answer the following questions:

• Are the instructions correct in successfully achieving the results?
• Is there room for improvement in the experiment instructions/description? What suggestions would you make?
• Would you make any alterations to the structure of the experiment to yield better results? What, and why?

Publish the data you have gained from your performing of the experiment here.

Answer the following:

• Does the data seem in-line with the published data from the original author?
• Can you explain any deviations?
• How about any sources of error?
• Is the stated hypothesis adequate?

Answer the following:

• What conclusions can you make based on performing the experiment?
• Do you feel the experiment was adequate in obtaining a further understanding of a concept?
• Does the original author appear to have gotten some value out of performing the experiment?
• Any suggestions or observations that could improve this particular process (in general, or specifically you, or specifically for the original author).

This is a sample format for a dated entry. Please substitute the actual date for “Month Day, Year”, and duplicate the level 4 heading to make additional entries.

As an aid, feel free to use the following questions to help you generate content for your entries:

• What action or concept of significance, as related to the course, did you experience on this date?
• Why was this significant?
• What concepts are you dealing with that may not make perfect sense?
• What challenges are you facing with respect to the course?

Remember that 4 is just the minimum number of entries. Feel free to have more.

This is a sample format for a dated entry. Please substitute the actual date for “Month Day, Year”, and duplicate the level 4 heading to make additional entries.

As an aid, feel free to use the following questions to help you generate content for your entries:

• What action or concept of significance, as related to the course, did you experience on this date?
• Why was this significant?
• What concepts are you dealing with that may not make perfect sense?
• What challenges are you facing with respect to the course?

Remember that 4 is just the minimum number of entries. Feel free to have more.

This is a sample format for a dated entry. Please substitute the actual date for “Month Day, Year”, and duplicate the level 4 heading to make additional entries.

As an aid, feel free to use the following questions to help you generate content for your entries:

• What action or concept of significance, as related to the course, did you experience on this date?
• Why was this significant?
• What concepts are you dealing with that may not make perfect sense?
• What challenges are you facing with respect to the course?

Remember that 4 is just the minimum number of entries. Feel free to have more.

This is a sample format for a dated entry. Please substitute the actual date for “Month Day, Year”, and duplicate the level 4 heading to make additional entries.

As an aid, feel free to use the following questions to help you generate content for your entries:

• What action or concept of significance, as related to the course, did you experience on this date?
• Why was this significant?
• What concepts are you dealing with that may not make perfect sense?
• What challenges are you facing with respect to the course?

Remember that 4 is just the minimum number of entries. Feel free to have more.

Identification and definition of the chosen keyword.

If you wish to aid your definition with a code sample, you can do so by using a wiki code block, an example follows:

/*
 * Sample code block
 */
#include <stdio.h>
 
int main()
{
    return(0);
}

Identification and definition of the chosen keyword.

If you want to demonstrate something on the command-line, you can do so as follows:

lab46:~$ cd src
lab46:~/src$ gcc -o hello hello.c
lab46:~/src$ ./hello
Hello, World!
lab46:~/src$ 

Identification and definition of the chosen keyword. Substitute “keyword” with the actual keyword.

If you wish to aid your definition with a code sample, you can do so by using a wiki code block, an example follows:

/*
 * Sample code block
 */
#include <stdio.h>
 
int main()
{
    return(0);
}

Identification and definition of the chosen keyword. Substitute “keyword” with the actual keyword.

If you want to demonstrate something on the command-line, you can do so as follows:

lab46:~$ cd src
lab46:~/src$ gcc -o hello hello.c
lab46:~/src$ ./hello
Hello, World!
lab46:~/src$ 

Identification and definition of the chosen keyword. Substitute “keyword” with the actual keyword.

If you wish to aid your definition with a code sample, you can do so by using a wiki code block, an example follows:

/*
 * Sample code block
 */
#include <stdio.h>
 
int main()
{
    return(0);
}

Identification and definition of the chosen keyword. Substitute “keyword” with the actual keyword.

If you want to demonstrate something on the command-line, you can do so as follows:

lab46:~$ cd src
lab46:~/src$ gcc -o hello hello.c
lab46:~/src$ ./hello
Hello, World!
lab46:~/src$ 

Identification and definition of the chosen keyword. Substitute “keyword” with the actual keyword.

If you wish to aid your definition with a code sample, you can do so by using a wiki code block, an example follows:

/*
 * Sample code block
 */
#include <stdio.h>
 
int main()
{
    return(0);
}

Identification and definition of the chosen keyword. Substitute “keyword” with the actual keyword.

If you want to demonstrate something on the command-line, you can do so as follows:

lab46:~$ cd src
lab46:~/src$ gcc -o hello hello.c
lab46:~/src$ ./hello
Hello, World!
lab46:~/src$ 

Identification and definition of the chosen keyword. Substitute “keyword” with the actual keyword.

If you wish to aid your definition with a code sample, you can do so by using a wiki code block, an example follows:

/*
 * Sample code block
 */
#include <stdio.h>
 
int main()
{
    return(0);
}

Identification and definition of the chosen keyword. Substitute “keyword” with the actual keyword.

If you want to demonstrate something on the command-line, you can do so as follows:

lab46:~$ cd src
lab46:~/src$ gcc -o hello hello.c
lab46:~/src$ ./hello
Hello, World!
lab46:~/src$ 

Identification and definition of the chosen keyword. Substitute “keyword” with the actual keyword.

If you wish to aid your definition with a code sample, you can do so by using a wiki code block, an example follows:

/*
 * Sample code block
 */
#include <stdio.h>
 
int main()
{
    return(0);
}

Identification and definition of the chosen keyword. Substitute “keyword” with the actual keyword.

If you want to demonstrate something on the command-line, you can do so as follows:

lab46:~$ cd src
lab46:~/src$ gcc -o hello hello.c
lab46:~/src$ ./hello
Hello, World!
lab46:~/src$ 

State the course objective; define what that objective entails.

State the method you will use for measuring successful academic/intellectual achievement of this objective.

Follow your method and obtain a measurement. Document the results here.

Reflect upon your results of the measurement to ascertain your achievement of the particular course objective.

• How did you do?
• Room for improvement?
• Could the measurement process be enhanced to be more effective?
• Do you think this enhancement would be efficient to employ?
• Could the course objective be altered to be more applicable? How would you alter it?

What is the question you'd like to pose for experimentation? State it here.

Collect information and resources (such as URLs of web resources), and comment on knowledge obtained that you think will provide useful background information to aid in performing the experiment.

Based on what you've read with respect to your original posed question, what do you think will be the result of your experiment (ie an educated guess based on the facts known). This is done before actually performing the experiment.

State your rationale.

How are you going to test your hypothesis? What is the structure of your experiment?

Perform your experiment, and collect/document the results here.

Based on the data collected:

• was your hypothesis correct?
• was your hypothesis not applicable?
• is there more going on than you originally thought? (shortcomings in hypothesis)
• what shortcomings might there be in your experiment?
• what shortcomings might there be in your data?

What can you ascertain based on the experiment performed and data collected? Document your findings here; make a statement as to any discoveries you've made.

What is the question you'd like to pose for experimentation? State it here.

Collect information and resources (such as URLs of web resources), and comment on knowledge obtained that you think will provide useful background information to aid in performing the experiment.

Based on what you've read with respect to your original posed question, what do you think will be the result of your experiment (ie an educated guess based on the facts known). This is done before actually performing the experiment.

State your rationale.

How are you going to test your hypothesis? What is the structure of your experiment?

Perform your experiment, and collect/document the results here.

Based on the data collected:

• was your hypothesis correct?
• was your hypothesis not applicable?
• is there more going on than you originally thought? (shortcomings in hypothesis)
• what shortcomings might there be in your experiment?
• what shortcomings might there be in your data?

What can you ascertain based on the experiment performed and data collected? Document your findings here; make a statement as to any discoveries you've made.

If you're doing an experiment instead of a retest, delete this section.

If you've opted to test the experiment of someone else, delete the experiment section and steps above; perform the following steps:

Whose existing experiment are you going to retest? Prove the URL, note the author, and restate their question.

Evaluate their resources and commentary. Answer the following questions:

• Do you feel the given resources are adequate in providing sufficient background information?
• Are there additional resources you've found that you can add to the resources list?
• Does the original experimenter appear to have obtained a necessary fundamental understanding of the concepts leading up to their stated experiment?
• If you find a deviation in opinion, state why you think this might exist.

State their experiment's hypothesis. Answer the following questions:

• Do you feel their hypothesis is adequate in capturing the essence of what they're trying to discover?
• What improvements could you make to their hypothesis, if any?

Follow the steps given to recreate the original experiment. Answer the following questions:

• Are the instructions correct in successfully achieving the results?
• Is there room for improvement in the experiment instructions/description? What suggestions would you make?
• Would you make any alterations to the structure of the experiment to yield better results? What, and why?

Publish the data you have gained from your performing of the experiment here.

Answer the following:

• Does the data seem in-line with the published data from the original author?
• Can you explain any deviations?
• How about any sources of error?
• Is the stated hypothesis adequate?

Answer the following:

• What conclusions can you make based on performing the experiment?
• Do you feel the experiment was adequate in obtaining a further understanding of a concept?
• Does the original author appear to have gotten some value out of performing the experiment?
• Any suggestions or observations that could improve this particular process (in general, or specifically you, or specifically for the original author).