======Project: Nintendo Nes into a PC====== {{ :user:cgaines:portfolio:f76utjawpiexcfnbo9.medium.jpg?200 |}} =====Objectives===== Create a working PC from an old Nintendo NES Console =====Prerequisites===== * Original Nintendo Nes (does not have to work) * Jetway 1.5GHz C7D' board * LCD screen * DDR2 memory * 40gb 2.5" laptop hard drive * 44pin-> 40pin IDE adapter * Slimline DVD/CD drive * Slimline -> IDE adapter * 80 Watt picoPSU * Leads to attach the power led * Possible extra fans * Dremel * Phillips screw driver * Cleaning materials - dry wash cloth, rubbing alcohol, regular tooth brush, q-tips, de-greaser * Small flash light * Solder =====Background===== Learning basic understanding of computer building with a splash of creativity =====Scope===== =====Attributes===== Understanding of basic computer building and configuring =====Procedure===== * gathering the needed supplies * preparing the case * preparing switches and power led * placing the hard drive * cutting a hold for the back plate * placing the DVD/CD drive * putting it all together * testing it all / Software installation * current use * final form =====Execution===== __Preparing the case__ * Obtain a Nintendo NES, you can bid or straight out buy one from ebay. * Acquire the tools needed * Phillips screw driver * cleaning materials {{ :user:cgaines:portfolio:new_camera_110.jpg?200 |}} * I ordered a Nintendo NES from eBay. {{ :user:cgaines:portfolio:new_camera_114.jpg?200 |}} * Gathered tools that I would need to clean and take apart the NES. {{ :user:cgaines:portfolio:new_camera_118.jpg?200 |}} * Use a gentle de-greaser to remove unwanted buildup of dirt and grease. {{ :user:cgaines:portfolio:new_camera_121.jpg?200 |}} * Flip over the NES and remove the screws, flip back over and remove lid. You may notice how dirty the inside is. For now just blow away the excess dirt. Then begin to unscrew the screws holding the metal plate in place. {{ :user:cgaines:portfolio:new_camera_128.jpg?200 |}} * Remember to make sure you have enough room to do this. Write on a list of how many screws you have, so you do not lose them. Then begin unscrewing the rest of the screws. {{ :user:cgaines:portfolio:new_camera_130.jpg?200 |}} * Once the hardware is movable, I found bugs, so this NES has been in storage for a long time. Remove the equipment slowly and carefully. {{ :user:cgaines:portfolio:new_camera_134.jpg?200 |}} * Remember witch cords are "A" and "B" these later will be soldered. {{ :user:cgaines:portfolio:new_camera_137.jpg?200 |}} * Remove the 14-pin from the board, you may want to use this, if it is still good, as a spare for another NES. {{ :user:cgaines:portfolio:new_camera_138.jpg?200 |}} * you might be watched, or thought your project is interesting, but remember to keep small parts away from kids. {{ :user:cgaines:portfolio:new_camera_142.jpg?200 |}} * This is the end result you are wanting a clean empty Nintendo NES console. {{ :user:cgaines:portfolio:new_camera_145.jpg?200 |}} * remember to take a break, and not get way to involved and forget the time. __Preparing switches and power led__ __Placing the hard drive__ {{ :user:cgaines:portfolio:may4th2013havanhglen_052.jpg?200 |}} __Cutting the hold for the back plate__ __Placing the DVD/CD drive__ {{ :user:cgaines:portfolio:may4th2013havanhglen_053.jpg?200 |}} __Putting it all together__ {{ :user:cgaines:portfolio:may4th2013havanhglen_054.jpg?200 |}} __Software installation__ __Current use__ __Final form__ =====Reflection===== Love it, just it has a tendency to get me a little stressed out. It is a very fun project for anyone that wants to try it, as long as you have the right materials and pieces of hardware needed. STILL AN ON GOING PROJECT =====References===== In performing this project, the following resources were referenced: * http://www.instructables.com/id/Build-a-Nintendo-NES-PC/