====== Nortel BayStack 450-24T Switch Setup and Integration ======
Connect the power supply to the switch.

Connect a console cable to the serial port (10101) on the back of the server.[1-4, 2-3, 5-5, 7-8, 9-9]-curently connected, but see in actual console cable is in the car.  minicom isn't working.

<<needs to go onto the server install page.>> apt-get install microcom to the server

<<server page>> conig microcom. 
 -microcom -s [opens microcom config menu]
 -baud = 9600
 -Parity = None
 -

Once Microcom is configured and running.  Once you have an assembled cable which will mimic a RS-232 9pin straight thru cable for communication.  Finally, once you have an online message on the screen from minicom, use the <ctrl>+Y key combination to access the switch configuration menu.

[[http://lab46.corning-cc.edu/~bewanyk/NortelRouter.pdf|Baystack 450 Manual from retrevo.com]]