<WRAP round gray box><WRAP muchbigger><html><center></html>STATUS updates<html></center></html></WRAP>
</WRAP>
======TODO======

  * the formular plugin is giving me errors, need to figure this out (email assignment form)
  * <del>set up symlink and cron job for userhomedirbackup.sh on nfs2; </del>update wiki page for nfs
  * update grade not-z scripts to handle/be aware of winter terms
  * <del>fix cursor keys on LAIR pods</del>
  * update system page for (new)www
  * redo DSLAB tweedledee/tweedledum with squeeze
    * rebuild DSLAB www, irc, auth as squeeze VMs
  * load balance/replicate www/wiki content between LAIR and DSLAB
  * adapt LAIR irc and lab46 to use self-contained kernels (how to do this?)
  * update system page for db
  * migrate nfs1/nfs2 system page to current wiki
  * update nfs1/nfs2 to squeeze
  * flake* multiseat page

======URLs======

Some links of interest:

  * [[http://www.llvm.org/|LLVM]]
  * [[http://www.reocities.com/harpin_floh/glglobe_page.html|GLglobe]]
  * [[http://www.heavens-above.com/|Heavens Above]]
  * http://wiki.debian.org/kristian_jerpetjoen
  * http://www.webupd8.org/2010/11/alternative-to-200-lines-kernel-patch.html
  * http://myproxylists.com/nix-brute-force
  * [[docs/plan9|My Plan9 Documentation page]]
  * [[system/sokraits_halfadder.offbyone.lan|The Sokraits/Halfadder System Documentation page]]
  * http://www.egghelp.org/commands/channels.htm
  * http://stackoverflow.com/questions/470617/get-current-date-and-time-in-php
  * http://www.rjsystems.nl/en/2100.php
  * [[http://bitsavers.trailing-edge.com/pdf/|BitSavers]]
  * [[http://mir.aculo.us/2010/06/04/making-an-ipad-html5-app-making-it-really-fast/|Time Zone HTML5 app]]
  * http://toic.org/2009/01/18/reverse-ssh-port-forwarding/
  * Divergent Thinking
    * http://en.wikipedia.org/wiki/Divergent_thinking
    * http://faculty.washington.edu/ezent/imdt.htm
  * https://help.ubuntu.com/community/Installation/QemuEmulator
  * Socket Programming
    * http://www.linuxhowtos.org/C_C++/socket.htm
    * http://www.few.vu.nl/~jms/socket-info.html
    * http://www.lowtek.com/sockets/
    * http://www.tenouk.com/Module40.html
    * http://www.tenouk.com/Module42.html
    * http://www.tenouk.com/Module43a.html
  * ALIX
    * http://markshroyer.com/guides/router/
    * http://markshroyer.com/2010/12/openbsd-alix-via-ubuntu/
    * http://www.martinmellor.com/freebies/pinouts/IDE44_2_5_pinout.htm (IDE 44-pin pin-out)
  * BeagleBoard
    * http://elinux.org/BeagleBoardDebian
  * Xen
    * http://www.tumfatig.net/20110125/running-openbsd-on-xen/ (OpenBSD HVM)
  * http://www.mydigitallife.info/fix-gmail-imap-invalid-credentials-or-web-login-requires-failure-error/
  * http://www.brookviewtechnologies.com/vip_interactive.htm
======Other Days======

======May 31st, 2011======

=====dokuwiki upgraded=====
There's been a new version of dokuwiki released; I opted to upgrade both /haas and the lab46 wiki this morning... following the instructions located at:

  * http://www.dokuwiki.org/install:upgrade

As far as I can tell, the upgrades took place without incident. No immediate problems noticed (and we have all summer to find/work out any kinks).

The wikis are now running the dokuwiki-2011-05-25 "rincewind" release.
======May 23rd, 2011======

=====LAIRwall returns=====
The LAIRwall was toted back to the LAIR today. Still disassembled, all pieces are now back, from its 2011 visit up to campus highlighting the annual student art show.

=====climate control off=====
As was discovered over the weekend, climate control once again went off in the LAIR.
======May 16th, 2011======

=====flake pods cursor keys=====
With the migration to the USB docking ports, there existed a situation where two of the four cursor keys were not appropriately mapped, so their auto-repeat functionality was not enabled.

This caused frustration during the semester as students could move the cursor as expected in two directions, but in the other two (I want to say right and down), they'd have to aggressively press those keys the number of times they wanted to move the cursor.

The problem could be temporarily rectified by manually running the following two commands in a local terminal (ie on one of the wildebeest VMs, **NOT** lab46):

<cli>
gnu:~$ xset r 113
gnu:~$ xset r 116
</cli>

From that point until they log out, all cursor keys (and their repeat functionalities) would work as expected.

But, it was very common to forget to re-run this on the next login.

I finally sat down to take another look at it and got it resolved!

Turns out I just needed to make an **~/.xinitrc** file in each user's home directory and place those two xset lines (verbatim). Additionally, I need to add a stanza to each X client system's **/etc/profile** file.

Upon each login, the file gets parsed and the user's cursor keys work!

The change to **/etc/profile** is as follows:

<code bash>
# Fix cursor key repeat settings for LAIR flake pods
if [ ! -z "$DISPLAY" ]; then
    if [ -e "$HOME/.xinitrc" ]; then
        source $HOME/.xinitrc
    fi
fi
</code>

Specifically, we check to see if there is a DISPLAY variable set, and if so, the inner if statement checks for the existence of $HOME/.xinitrc... if it is there, source it (which will run those two needed xset lines). And bam! Cursor key repeats work!

I applied the necessary /etc/profiles changes on all machines in the wildebeest herd and lab46.
====Propagation script====
To propagate this into each user's home directory, I hopped onto NFS and ran the following:

<code bash>
#!/bin/bash
#
# Put the proper .xinitrc file in each user's home directory
#
cd /export/home

for user in `/bin/ls -1A | grep -v '^wedge$'`; do
    cp -v wedge/.xinitrc $user/.xinitrc
    chown $user:lab46 $user/.xinitrc
done

exit 0
</code>

If any users already had a .xinitrc file it would not overwrite it.

=====lab46: installed xset=====
I ended up installing the x11-xserver-utils package so that the **xset** command would be available, which enables the enabling of cursor key repeat on the LAIR flake pods.
======May 15th, 2011======
=====Thoughts on mail=====
During the great NFS1/NFS2 DRBD resync of 2011, I realized that mail access was horrendously slow, due to the fact we're using Maildir/, and there are hundreds, if not thousands of files that need to be accessed. During heavy fileserver load, mail server performance suffers.

So I thought to migrate all mail from nfs back to mail (thinking that the reason I moved it from mail to nfs in the first place was to eliminate redundancy-- all the VMs used to be hosted on nfs, now they are not).

I realized though, that the prime reason for keeping mail on nfs and NFS mounting it, was to enable "You have new mail" notifications for users on lab46. Until this problem is solved, mail must remain on nfs.

=====maildirbackup.sh=====
In the spirit of backing up user home directories, I realized I should also perform similar actions with the mail data. So I adapted homedirbackup.sh to a script called **maildirbackup.sh** that runs daily on the nfses:

<code bash>
#!/bin/bash
#
# maildirbackup.sh - script responsible for performing Maildir/ directory back ups
# to a location that is NOT the fileserver.
#
# 20110515 - adapted homedirbackup.sh to maildirbackup.sh (mth)
# 20101014 - fixed a directory typo on destination (mth)
# 20101013 - initial version (mth)
#
ismaster="`df | grep export | wc -l`"
if [ "$ismaster" -eq 1 ]; then

    date=`date +"%Y%m%d"`
    day=`date +"%d"`
    if [ "$day" -lt 14 ]; then
        bhost="sokraits"
    else
        bhost="halfadder"
    fi

    cd /export/lib

    # Check the load average, and delay as long as we're above 200% CPU
    loadavg=`uptime | sed 's/^.*average: \([0-9][0-9]*\)\.\([0-9][0-9]\).*$/\1/'`
    while [ "$loadavg" -ge 2 ]; do
        sleep "$((RANDOM % 64 + 64))"
        loadavg=`uptime | sed 's/^.*average: \([0-9][0-9]*\)\.\([0-9][0-9]\).*$/\1/'`
    done

    ssh $bhost "mkdir -p /export/backup/mail; /export/backup/prune.sh mail 14"
    tar cpf - mail | gzip -9 | ssh $bhost "dd of=/backup/mail/mail-${date}.tar.gz"

fi
exit 0
</code>

I decided to keep mail backups for 14 days (2 weeks). The archives are relatively small (~140MB), so this shouldn't be a huge space waster.

It also makes use of a new option to prune.sh, that allows us to specify the number of backups to keep.
=====Restoring the universe post resync=====
To assist in the nfs1/nfs2 drbd resync, I disabled many automated jobs on nfs and www to lighten the load on the disk.

Now with the resync done, I have re-enabled the jobs and have set about fixing additional bugs discovered thanks to taking nfs1 down on friday.

It turns out that my user home directory backup scripts had not been running since late December (script existed, but job not present in any cron file). So I re-enabled that and manually kicked off a job to ensure that all proper connectivity was in place. This once again appears to be operational (I should check tomorrow to verify that the b's have been backed up).

====lairdump not working====

Another problem observed was yesterday a lairdump run was to take place, and although the jobs fired off on their respective clients, there was some sort of problem getting a session on nfs2 (it would establish the connection then promptly end the session).. 

This turned out to be a security/access issue, which was resolved by editing /etc/security/access.conf on nfs2 and adding "dump" as a privileged user for login:

<file>
-:ALL EXCEPT root lair dump:ALL EXCEPT LOCAL
</file>

Previously, "dump" was not included in the list of users/groups allowed to log in, so the system would happily cut off the connection each time.
=====LAIRdump pruning=====
I've had a prune script in place for some time which, upon the conclusion of a client's lairdump, will cap off the number of backups at a count of 4. This works great for clients with only 1 dump file per lairdump... some machines (like www, lab46, and koolaid), have multiple dump files (www especially has one for /, /var/www, and /var/repos).

My script logic would unceremoniously list all the files and delete all but the last four. File ordering being what it is, it results in the possibility of entirely removing legitimately recent files and preserving only one of the dump file series (on www this resulted in the deletion of / and /var/repos, but kept 4 copies of /var/www).

I enhanced the prune.sh as follows:

<code bash>
#!/bin/bash
#
# prune.sh - prune backups, weed out any entries older than the most recent
#
# 20110515 - added logic to handle clients with multiple dump files (mth)
# 20110101 - adapted userdir prune to lair-backup (mth)
# 20101013 - initial version (mth)
#

##
## Configuration Variables and Settings
##
unit="$1"
datapath="/export/backup/${unit}"

##
## Make sure we have enough data to run
##
if [ -z "$1" ]; then
    echo "ERROR! Must be called with a proper argument."
    exit 1
fi

##
## Check if an alternate backup count is provided (arg 2)
##
bknum="`echo $2 | grep '^[0-9]*$'`"
if [ -z "$bknum" ]; then
    bknum=4     # if no count is provided, default to this value
else
    bknum="$2"
fi

##
## Ensure provided data is correct
##
if [ -e "${datapath}" ]; then

    cd ${datapath}      # move into position

    ##
    ## There may be a variety of entries, condense them, then iterate
    ##
    for entry in `/bin/ls -1A | sed 's/-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9].*$//' | sort | uniq`; do

        bckcnt="`/bin/ls -1A ${entry}-[0-9]* | wc -l`"  # how many are there

        ##
        ## If we're above our threshold, process the outliers
        ##
        if [ "$bckcnt" -gt "${bknum}" ]; then
            echo
            echo "Pruning old backups . . ."
            let removal=$bckcnt-$bknum
            files="`/bin/ls -1A ${entry}-[0-9]* | head -$removal`"
            rm -vf $files
        fi
    done
fi
exit 0
</code>

Specifically, the addition of the for loop based on the list generated by the expression: **<nowiki>/bin/ls -1A | sed 's/-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9].*$//' | sort | uniq</nowiki>**, which will identify all present files so we can find the 4 most recent of each.

This way, no modifications need to be performed to the client end, only to prune.sh on the server.

I deployed a copy of this **prune.sh** script on sokraits/halfadder, for use in processing the user home directory backups.

Note the other new feature- the specification of a 2nd command-line argument which will represent the number of backups to keep.
======May 14th, 2011======
=====Climate Control off-line=====
At around 2pm Saturday, climate control kicked off, and the temperature shot up to around 79 degrees.

=====NFS resync complete=====
The nfs1/nfs2 DRBD peer resync completed around 11:30pm. Disk performance has returned to normal.
======May 13th, 2011======

=====nfs1/nfs2 rebooted=====
While debugging what I thought might have been some sort of data corruption error (turned out to be a false alarm), I chose to reboot nfs1 and nfs2.

nfs1 had been running for just over 420 days when I took it down, and brought it back up as a secondary node for now, giving nfs2 the lead role for a while.

This resulted in uncovering several bugs that needed to be addressed or still need to be worked out:

  * nfs1's root drive in grub was configured to be /dev/hdb1 instead of /dev/hda1, so it wouldn't initially boot (FIXED)
  * the realtek card in nfs1 (serving the 10.80.2.0/24 subnet) appeared to be defective, not wanting to get a link and IP address, so I removed it, and nfs1 is now serving offbyone.lan from the 2nd onboard network interface (FIXED).

The method of switching nfs2 from secondary to primary largely went without a hitch... I followed the instructions I had left for myself in /etc/rc.local, and also had to fill in some gaps. Here are the actual instructions:

====nfs2 secondary to primary instructions====

  - make sure nfs1 is not primary and does not have /dev/drbd0 mounted (I ensured it was powered off before proceeding)
  - /sbin/drbdadm primary r0
  - /sbin/mount /dev/drbd0 /export
  - /sbin/ifconfig eth0:1 inet 10.80.1.3 netmask 255.255.255.0 up
  - /sbin/ifconfig eth2:1 inet 10.80.2.3 netmask 255.255.255.0 up
  - **DO NOT SET HOSTNAME TO 'nfs', THIS MESSES WITH DRBD** hostnames must be of the form nfs1.lair.lan and nfs2.lair.lan (to match host ID in /etc/drbd.conf)
  - /etc/init.d/nfs-kernel-server restart
  - /etc/init.d/nfs-common restart
  - /usr/sbin/thttpd -C /etc/thttpd/thttpd.conf -i /var/run/thttpd.pid
  - /etc/init.d/cron restart
  - /etc/init.d/nscd restart

Similar would exist for nfs1 (in fact, it would be identical except for the now changed offbyone.lan network interface).

Some TODOs for the summer regarding the NFSes:

  * rebuild nfs1/nfs2 with squeeze
  * install SSD as root booting drive
  * utilize 2nd onboard NIC on BOTH NFS1 and NFS2
  * document nfs1/nfs2 config on wiki
  * finally roll out high-availability/hot fail-over

=====lab46/www/irc/mail rebooted=====
In response to rebooting the NFSes, I ended up having to reboot lab46 and related services due to higher loads resulting from the switchover (some processes just do not like having NFS pulled out from under them-- especially eggdrop IRC bots).

We lasted almost the entire semester, so it was certainly a good run.

=====home directories not backed up since december=====
As a result of my investigations into potential data loss/corruption (even though they proved to be unnecessary), I discovered that my automated home directory backup scripts (to back up user home directories to sokraits/halfadder each night by letter of alphabet placement) had not run since late December of 2010... so I had no recent data backed up for users.

I'll be adding this script back in-- the homedirbackup.sh script, which is located in /export/lib/homedirbackup.sh... to the appropriate cron jobs on nfs1/nfs2.

=====nfs DRBD0 volume rebuilding=====
As a result of the outage and apparently the time that transpired in getting both NFSes linked back up, they appear to be solving their re-syncing by performing a FULL resync of all 2.9TB of disk... so the NFSes will be a little busy this weekend.

To assist in this process, I have temporarily disabled all cron jobs that would result in additional disk activity (apt-mirror, netsync, backups)
======May 12th, 2011======
=====OpenBSD on alix board with flash on disk=====
I finally got around to playing with the flash on disk card in the alix box.

The switch on the card is to select master or slave.. I originally ran into some problems because the compact flash card was assuming the master position.

I ended up being bold and removing the compact flash card (which meant unscrewing the antennae cable to remove the board, since the CF card is pretty much inaccessible).. and did a PXE boot to reinstall OpenBSD 4.9.

Seems to be working fine-- it detects the card as a 7279.9MB drive (wd0), which I custom partitioned (put /, /usr, /usr/local, /home, /var, /tmp in separate partitions).

Installed and rebooted without a hitch.. onto putting the desired packages back on.

Does seem a bit more responsive with the disk on flash vs. the CF card.
======May 11th, 2011======

=====flash on disk=====
These are nifty-looking things:

  * http://www.supertalent.com/products/flash-module.php?type=IDE

And the data sheet:

  * http://www.supertalent.com/products/flash-module.php?type=IDE#

My testing will be done on the SF8GB5F45 (8GB) (8GB) module, the MLC-based version. Not sure if I have version 2 or version 3 (probably version 2).

MLC-based flash seems to be rated for 10,000 write/erase cycles. The compact flash card I have in ambitus (the alix box) appears to also be MLC-based. The advantage of the SF8GB5F45 is that it utilizes the IDE interface, so I am expecting better throughput.
======May 10th, 2011======

=====GIMP on LAIRstation 2=====
With the C/C++ class' "Shoveling Bob" development, we had a need for a graphics program better than XPaint, so I install the GIMP on LAIRstation 2... I should make sure it is eventually installed on all the LAIRstations.
=====missing vim color schemes=====
Some lab46 users who have customized their vim settings experience problems when running vim on the LAIRstations, due to missing color schemes. I went and checked, and it appears that Ubuntu and Debian ship with different default color schemes.

I fixed this problem by copying over the missing color schemes from lab46 to the LAIRstation:

<cli>
lab46:/usr/share/vim/vim72/colors$ scp darkblue.vim nightshade* sean.vim widower.vim root@lairstation1.lair.lan:/usr/share/vim/vim72/colors/
root@lairstation1.lair.lan's password: 
darkblue.vim                                            100% 2990     2.9KB/s   00:00    
nightshade.vim                                          100% 3430     3.4KB/s   00:00    
nightshade_print.vim                                    100% 3198     3.1KB/s   00:00    
sean.vim                                                100% 2774     2.7KB/s   00:00    
widower.vim                                             100% 1248     1.2KB/s   00:00    
lab46:/usr/share/vim/vim72/colors$ 
</cli>

This resolved that problem.

=====fluxbox on the LAIRstations=====
There is a need to run fluxbox on the LAIRstations in certain situations to test things (ie basically replicate the pod-like environment running fluxbox but have dual screens).

I wanted to just have a nice "select your environment" on login, but this apparently is not possible, so I did it manually.

The procedure to do this is as follows:

====step 1: disable x-session-manager====
This step may prove to be unnecessary, especially if we manually stop gdm. But I did it on my test attempt, so I mention it here:

<cli prompt="# ">
lairstationX:~# cd /etc/alternatives
lairstationX:/etc/alternatives# mv x-session-manager /
lairstationX:/etc/alternatives# 
</cli>

Don't forget to restore x-session-manager otherwise things will most certainly not work as normal.

As I said, we may be able to avoid this step entirely and leave x-session-manager in place.

<WRAP round info box>UPDATE: This step was verified to be necessary, **do not skip it**</WRAP>
====step 2: install necessary packages====
To ensure minimal operation, install the following packages:

  * fluxbox
  * rxvt

====step 3: change default window manager====
In this step, we make a change to the system's default window manager, so that when we start X, it knows to start fluxbox:

<cli prompt="# ">
lairstationX:~# update-alternatives --config x-window-manager
There are 2 choices for the alternative x-window-manager (providing /usr/bin/x-window-manager).

  Selection    Path                   Priority   Status
------------------------------------------------------------
* 0            /usr/bin/metacity       60        auto mode
  1            /usr/bin/metacity       60        manual mode
  2            /usr/bin/startfluxbox   50        manual mode

Press enter to keep the current choice[*], or type selection number: 2
update-alternatives: using /usr/bin/startfluxbox to provide /usr/bin/x-window-manager (x-window-manager) in manual mode.
root@lairstationX:/etc/alternatives# 
</cli>

So, change it from auto mode metacity to manual mode startfluxbox.

====step 4: copy LAIR fluxbox config====
I just scp'ed the fluxbox-menu from one of the wildebeest herd so we'd have the same config:

<cli prompt="# ">
lairstationX:~# scp gnu.offbyone.lan:/etc/X11/fluxbox/fluxbox-menu /etc/X11/fluxbox/
root@gnu.offbyone.lan's password: 
fluxbox-menu                                            100% 3443     3.4KB/s   00:00    
lairstationX:~# 
</cli>

I also made the traditional fluxbox-menu-good as a backup in /etc/X11/fluxbox so when I install new packages and it overwrites the fluxbox menu to ubuntu defaults, we aren't that out of luck (just re-copy the "good" one to fluxbox-menu and we're back in action).

====step 5: disable gdm====
Now we're set... let's disable gdm so we can commence with this alternate arrangement:

<cli prompt="# ">
lairstationX:~# /etc/init.d/gdm stop
</cli>

====step 6: run 'startx'====
With these changes set, log in as the desired user and fire up X by running the **startx** script.

You should be good to go.

====step 7: cleanup====
When done, we should restore the necessary defaults... which can be done as follows:

<cli prompt="# ">
lairstationX:~# mv /x-session-manager /etc/alternatives/
lairstationX:~# update-alternatives --config x-window-manager
There are 2 choices for the alternative x-window-manager (providing /usr/bin/x-window-manager).

  Selection    Path                   Priority   Status
------------------------------------------------------------
  0            /usr/bin/metacity       60        auto mode
  1            /usr/bin/metacity       60        manual mode
* 2            /usr/bin/startfluxbox   50        manual mode

Press enter to keep the current choice[*], or type selection number: 0
update-alternatives: using /usr/bin/metacity to provide /usr/bin/x-window-manager (x-window-manager) in auto mode.
root@lairstation1:~# /etc/init.d/gdm start
</cli>

And we should be back at the usual GDM login screen. All set!

======May 9th, 2011======
=====LAIRstation updates=====
Applied any updates to all 4 LAIRstations, also made sure that xwit, xautomation, and xpaint were installed.
======May 5th, 2011======

=====capri campus connection=====
With the on-going campus connection investigations, some "errors" were finally noticed, so it was requested we change our cable... I did that and more... swapped out the cable, AND I changed the network interface.

So capri is plugged into the campus into the free interface (xl0), adjusted all the related things (moved /etc/hostname.pcn0 to /etc/hostname.xl0, and changed the ext_if variable definition in /etc/pf.conf).. I also rebooted for good order.

This led to needing to remember how to re-establish the CloudVPN connection for the LAIRwall up on campus:

=====LAIRwall VPN=====
I'm writing this down so we don't forget!

====network config====

I created **/etc/hostname.tun2**:

<code>
link0 up
</code>

If desired, we can do this manually: **ifconfig tun2 link0 up**

I added tun2 into **/etc/bridgename.bridge0**:

<code>
add em1
add tun0
add tun2
up
</code>

If desired, we can do this manually as follows: **brconfig bridge0 add tun2**

Make sure these are up and operational before proceeding to the actual cloudvpn config:

====cloudvpn config====
As root, fire up a screen session, then do the following:

<cli prompt="# ">
caprisun:~# cd /home/squirrel/cloud
caprisun:/home/squirrel/cloud# rm -f gate.sock
caprisun:/home/squirrel/cloud# ./lairnorth
2011-05-05 11:15:57: (info) cloud@39:   cloudvpn starting
2011-05-05 11:15:57: You are using CloudVPN, which is Free software.
2011-05-05 11:15:57: For more information please see the GNU GPL license,
2011-05-05 11:15:57: which you should have received along with this program.
2011-05-05 11:15:57: (info) common/sighandler@25:       setting up signal handler
2011-05-05 11:15:57: (info) cloud@58:   heartbeat is set to 50000 usec
2011-05-05 11:15:57: (info) cloud/status@153:   exporting status to file `./status.txt'
2011-05-05 11:15:57: (info) cloud/route@63:     ID cache max size is 32768
2011-05-05 11:15:57: (info) cloud/route@67:     ID cache reduction halftime is 10000002011-05-05 11:15:57: (info) cloud/route@259:    only ping changes above 5msec will be repo
rted to peers
2011-05-05 11:15:57: (info) cloud/route@263:    maximal node distance is 642011-05-05 11:15:57: (info) cloud/route@267:    default TTL is 128
2011-05-05 11:15:57: (info) cloud/route@271:    hop penalization is 0%
2011-05-05 11:15:57: (info) common/sq@108:      maximal input queue size is 16777216 bytes
2011-05-05 11:15:57: (info) common/network@70:  listen backlog size is 32
2011-05-05 11:15:57: (info) cloud/comm@1460:    max connections count is 1024
2011-05-05 11:15:57: (info) cloud/comm@1466:    maximal size of internal packets is 8192
2011-05-05 11:15:57: (info) cloud/comm@1472:    max 1024000 pending data bytes
2011-05-05 11:15:57: (info) cloud/comm@1478:    max 256 remote routes
2011-05-05 11:15:57: (info) cloud/comm@1483:    connection retry is 10sec
2011-05-05 11:15:57: (info) cloud/comm@1488:    connection timeout is 60sec
2011-05-05 11:15:57: (info) cloud/comm@1494:    connection keepalive is 5sec
2011-05-05 11:15:57: (info) cloud/comm@85:      Initializing ssl layer
2011-05-05 11:15:57: (info) cloud/comm@175:     loaded 1 CAs from ./ca.crt
2011-05-05 11:15:57: (info) cloud/comm@197:     SSL initialized OK
2011-05-05 11:15:57: (info) cloud/comm@1331:    trying to listen on `0.0.0.0 3201'
2011-05-05 11:15:57: (info) common/network@148: created listening socket 5
2011-05-05 11:15:57: (info) cloud/comm@1339:    listeners ready
2011-05-05 11:15:57: (info) cloud/comm@1376:    no connections specified
2011-05-05 11:15:57: (info) cloud/gate@412:     creating gate on `./gate.sock'
2011-05-05 11:15:57: (info) common/network@148: created listening socket 6
2011-05-05 11:15:57: (info) cloud/gate@420:     gates ready
2011-05-05 11:15:57: (info) cloud/gate@475:     max gate count is 64
2011-05-05 11:15:57: (info) cloud/gate@477:     gate OK
2011-05-05 11:15:57: (info) cloud@113:  initialization complete, entering main loop
2011-05-05 11:15:59: (info) cloud/comm@283:     get connection from address 192.168.9.215 57354 on socket 7
2011-05-05 11:16:01: (info) cloud/comm@755:     socket 7 accepted SSL connection id 0
2011-05-05 11:16:34: (info) cloud/gate@161:     gate 0 handling address e78adefa.00:bd:44:e8:bd:03

</cli>

CTRL-a c to create a second console, run the following:

<cli prompt="# ">
caprisun:~# cd /home/squirrel/cloud
caprisun:/home/squirrel/cloud# ether -gate ./gate.sock -iface_dev tun2
2011-05-05 11:16:34: (info) common/sighandler@25:       setting up signal handler
2011-05-05 11:16:34: (info) common/sq@108:      maximal input queue size is 16777216 bytes
2011-05-05 11:16:34: (info) common/network@70:  listen backlog size is 32
2011-05-05 11:16:34: (info) ether@160:  using `tun2' as interface
2011-05-05 11:16:34: (info) ether@361:  iface has mac address 00:bd:44:e8:bd:03
2011-05-05 11:16:34: (info) ether@197:  iface: initialized OK
2011-05-05 11:16:34: (info) ether@775:  gate connected OK

</cli>


======May 3rd, 2011======
=====Enabling X11 TCP connections on Ubuntu=====
This has been an issue that crops up from time to time, especially on modern Ubuntu systems, as we can't just remove a "-nolisten tcp" from an .xserverrc file and expect it to work.

I went and looked up some stuff, and came across the following:

In **/etc/gdm/gdm.schemas**:

<code>
    <schema>
      <key>security/DisallowTCP</key>
      <signature>b</signature>
      <default>true</default>
    </schema>
</code>

Change that **true** to a **false**:

<code>
    <schema>
      <key>security/DisallowTCP</key>
      <signature>b</signature>
      <default>false</default>
    </schema>
</code>

Save, and reboot.
======May 2nd, 2011======
=====LAIRwall update=====
It appears me optimizations made on friday have worked, for the entire LAIRwall automatically booted up and went into an operational state this morning at the intended time.

I've uploaded some new student images (will likely get them inserted into the slide show tomorrow) and have been performing some weather data updates... I need to automate the weather updates so it grabs the new weather data itself.
======May 1st, 2011======
=====Xen NetBSD domU=====
For my UNIX class, I am going to have them perform various system administration tasks on a NetBSD VM. This meant figuring out how to pull of NetBSD under Xen, since it has been at least a couple of years (the old anti-/evil-jb days)

Some links:

  * http://www.netbsd.org/ports/xen/howto.html#netbsd-domU
  * http://wiki.xensource.com/xenwiki/NetBSDdomU
  * http://nyftp.netbsd.org/pub/NetBSD-daily/netbsd-5-1/201105010400Z/i386/binary/kernel/

As it turns out, NetBSD and Xen4 have network issues (We've experienced this a bit with the Plan9 stuff)... apparently running an older NetBSD kernel works... I moved my efforts over to vmserver01, which is running Lenny and Xen3. Works fine.

Basically, I downloaded the following NetBSD kernels (and gunzipped them):

  * netbsd-INSTALL_XEN3PAE_DOMU
  * netbsd-XEN3PAE_DOMU

I created a Xen disk image as usual (dd a file full of zeroes).

Xen config file is as follows:

<code>
#kernel      = "/xen/images/netbsd-INSTALL_XEN3PAE_DOMU"   # For install
kernel      = "/xen/images/netbsd-XEN3PAE_DOMU"            # For normal operations
vcpus       = '1'
memory      = '256'
root        = '/dev/xvda1 ro'
disk        = [ 'file:/xen/images/sp2011eoce.disk,xvda1,w' ]
name        = 'netbsd'
dhcp        = 'dhcp'
vif         = [ 'mac=00:16:3E:2E:C0:39' ]
on_poweroff = 'destroy'
on_reboot   = 'restart'
on_crash    = 'restart'
</code>

Note the difference in kernels--- have one enabled for the actual install, and the other enabled for regular boots.

That's it!

=====NetBSD on mirror=====
I downloaded NetBSD 5.1 ISO images for i386 and amd64, and put them on the web-accessible repository so we can perform local installs.

<html><center></html>
^  [[status/status_201104|Previous Month]]  |  ^  [[:status|Current Month]]  |  ^  [[status/status_201106|Next Month]]  |
<html></center></html>